Simple Budget RC Car (Easy to Print & Assemble)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple RC car built for the 280 motor with 3d printed gears.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 75
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Summary
Overview
This is a fully 3D-printable RC car engineered to prove that great performance doesn’t require expensive components. While most RC projects rely on high-end brushless systems, this platform is designed specifically around the standard 280-size DC motor (2mm axle) – a motor that is affordable, accessible, and perfect for indoor engineering projects.
With a total length of 300mm, the car features a robust and elongated wheelbase, providing stability and a sleek silhouette. Since the 280-motor is traditionally "weak" for a vehicle of this size, the heart of this project is a custom-designed two-stage gearbox.
Technical Specifications
Drivetrain: Two-stage internal gearbox with a 1:25 reduction ratio.
Motor Compatibility: Optimized for 280-size brushed motors, but the chassis is designed to be easily modifiable for various powerplants.
Chassis: Rigid-frame construction (no shocks) optimized for smooth indoor surfaces and low-friction environments.
Scale: Large-format indoor cruiser (300mm length).
The Engineering Solution
The challenge was to generate sufficient torque from a low-power motor. By implementing a 1:25 gear reduction, the RC Car achieves a perfect balance between controllable indoor speeds and enough "grunt" to navigate carpets and minor obstacles. This makes it an ideal educational project for understanding mechanical advantage and gear ratios.
Assembly Instructions
To ensure a successful build, follow these steps:
Gearbox & Motor: Start by seating the motor in the chassis. For the most reliable power transfer, use a small amount of high-strength adhesive (epoxy or superglue) to secure the motor once the gear mesh is perfectly aligned.
Drivetrain: Ensure all 3D-printed gears are cleaned of any support material. A small drop of plastic-safe lubricant on the gear teeth will significantly increase efficiency and reduce noise.
Hardware: The rest of the assembly uses a standard bolt-and-nut system. This ensures the car is easy to maintain, repair, and upgrade as you iterate on the design.
Tires: For the best grip on indoor floors, I recommend printing the tires in TPU (flexible filament), though PLA works fine for drifting on wooden surfaces.