AirMaks Katran Bag Rider with Monopod
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Bag Rider for the AirMaks Katran with 10mm hight adjustable monopod
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 82
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by the original bag rider by AirMaks, I designed this model. It fits really nicely over the standard buttpad.
The monopod is 10mm in diameter. I took a piece of 10mm aluminium rod.
Print the bag rider on it's side. You will need to add supports and likely play around with some support blockers to avoid the M4 nut holes to get filled.
Pause the print 2x at defined heights to insert 2 times a M4 (standard) nut. One nut is for the monopod fixation, the other is to fix the bag rider to the buttpad.
You will need a ~40 mm M4 bolt and another M4 nut for the monopod knob. Alternatively a piece of M4 threaded rod with two nuts. A M4 countersunk machine screw is need to fix the assembly to the buttpad.
I used this knob here:
I printed mine with Formfutura's Carbonfil CF03 PETG.
Enjoy!