AirMaks Katran Bag Rider with Monopod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bag Rider for the AirMaks Katran with 10mm hight adjustable monopod
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by the original bag rider by AirMaks, I designed this model. It fits really nicely over the standard buttpad.
The monopod is 10mm in diameter. I took a piece of 10mm aluminium rod.
Print the bag rider on it's side. You will need to add supports and likely play around with some support blockers to avoid the M4 nut holes to get filled.
Pause the print 2x at defined heights to insert 2 times a M4 (standard) nut. One nut is for the monopod fixation, the other is to fix the bag rider to the buttpad.
You will need a ~40 mm M4 bolt and another M4 nut for the monopod knob. Alternatively a piece of M4 threaded rod with two nuts. A M4 countersunk machine screw is need to fix the assembly to the buttpad.
I used this knob here:
I printed mine with Formfutura's Carbonfil CF03 PETG.
Enjoy!