1 / 5
CSM Crank Knob with Bearing Support - Hidden Bolt Head Remix
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Crank handle for CSM - knob version remix with bearing support and deeper cutout so that the nut/bolt head is hidden
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 0
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Small remix for pandel's CSM crank handle.
Compared to the original model, only the depth of the bearing cutout has changed -- from 7mm to 16mm (left: old, right: new). This way, the nut/bolt doesn't stick out at the end.

I've added the unmodified file of the 1mm shim (that goes in the bearing) to this model for convenience.
For assembly instructions and required parts, check out the original model: