Netgear GS108 Dual 19" Rack Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Rack mount for 19" racks for two Netgear GS108 switches
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 26
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution — Share Alike
A rack mount for the Netgear GS108 switch, that fits 19 inch racks. The design is modular as it is half width, so other components could be mounted on the other half (by making a compatible mount) if you only have one switch to mount. Press fitment for the switch for simple installation.
Fits on the build plate of a Prusa MK4. I printed with supports for the big rack screw holes and the front slot for the switch. I used the short M3 threaded inserts for the holes, and M3x10mm screws to mount them together, but you could use M3 nuts instead.
BOM for a set, left and right (what I used):
2x M3x10mm screws
2x M3x3mm short threaded inserts from CNC Kitchen, but other threaded inserts with 4mm mounting diameter and max 5mm mounting depth should work
BOM for a set, left and right (alternative):
2x M3x10mm screws
2x M3 nuts