1 / 5
Air conditioning hose reducer 150mm with flange reducer 120mm — zdjęcie 1
1 / 5

Air conditioning hose reducer 150mm with flange reducer 120mm

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Air conditioning hose reducer 150mm with flange reducer 120mm

Ocena
0 / 5
Polubienia
6
Pobrania
17
Wydruki
0
Wyświetlenia
126
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Air conditioning hose reduction. On one side 150mm on the other side 120mm flange. This is an asymmetrical flange for spaces where there is not enough space from the side. Also, the wall height of each part is reduced to 40mm (80mm total). On the wider side there is a protrusion on the outer perimeter to hold the hose. There is no protrusion on the narrower side. It is not intended to connect the hose but to slide it into the hole.

I recommend printing from PETG because of its temperature resistance. For printing I chose more classic supports, not a tree. 2 perimeters, the layer can be larger, for example 0.28 mm.

Tagi