Ikea Symfonisk Floor Speaker Lamp Mini Legs for Table Top Use
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Converts a floor speaker lamp into a table top edition. Replacing the long legs and base with stumps.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 66
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Share Alike
Low profile table top legs that replaces the original floor stand with compact stabilising legs, lifting the lamp just enough to clear the power cable and eliminate wobble.
You'll need three, any brims etc. can be a pain to remove but there is a section of no thread to try and clear the bed to aid in clean up. You might want to keep one of the legs in to get the right angle to get started.
I printed in abs 4 perimeters and about 20% infill. The screw threads have been slightly undersized to allow for some variation in printing. Supports shouldn't be needed.