TapeStack Collection Rack for Masters of the Universe (MotU) - with PUSH-TO-PICK FUNction
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TapeStack Collection Rack for Masters of the Universe (MotU) - with PUSH-TO-PICK FUNction
- Ocena
- 5 / 5
- Polubienia
- 24
- Pobrania
- 37
- Wydruki
- 0
- Wyświetlenia
- 350
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We created the TapeStack System for story cassettes and audio dramas to be stored appropriatly with a little fun factor, too.
It is made for common cassettes of the 1980s with size 109,5 x 69 x 17mm
If you are interested in all TapeStack parts click HERE. And there are more to come...
About this COLLECTION RACK:
It is made especially for the 37x tapes of the MASTERS OF THE UNIVERSE audio cassettes. In this case we decided to make it 2 levels high.
Color scheme: We decided to print the racks in discreet BLACK and the sliders & levers in YELLOW & RED which matches very good with the original color scheme of the tapes from EUROPA.
The complete rack consits of the following parts.
Baseline (width 20)
FIRST level (width 20) with places for 17x tapes
1x STACKABLE RACK (width 8)
1x DISPLAY STAND (width 4)
1x STACKABLE RACK (width 8)
SECOND level (width 20) with places for 20x tapes
1x STACKABLE RACK (width 7)
1x STACKABLE RACK (width 6)
1x STACKABLE RACK (width 7)
I used the STACKABLE version for second level, too to have the possibility to raise the construction in future. Second level will completely be covered with lids on top for smooth optic similar to the NON STACKABLE rack version.
TOP level (width 20)
This is only a suggestion how to realize such a custom rack focussed on your favourite audio series. YOU can do it the way YOU like of course.
Printing instructions:
You will find only the .3mf files in the download section. They contain 10pcs of the model. If you separate to OBJECTS you can easily fade-out parts of any number to get your prefered stacks of 1 till 10 parts width.
If you need .stl files and further (printing) information please visit the model pages liked in the description above, thanks.
I recommend to print in PLA except the slider. This should be printed in PETG because of the filigran pins at the end.
Layerheight: 0.2mm
Infill: 15%
Enjoy & Have fun and please post your makes, THX!