DMX Terminator Endcap
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Use it to cover your diy dmx terminator. I ordered cheap XLR plugs and wanted to have a nice(r) end-caps.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 5
- Wydruki
- 0
- Wyświetlenia
- 20
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Public Domain
I don't want to link neither ebay nor amazon but i basically got the "cheap" black metal xlr plugs, they're mostly sold in packs of 5 &10
The threads on the metal housing are m17x1.0 or at least they fit well enough.
Since the cap and strain-relief also act as a back-stop for the plug-insert i chose to have reduced clearance for the strain-relief. It gets bent a bit but there is plenty space for the resistor
Use a 120ohm 0.25W jelly-bean resistor between pin 2 and 3.
I have also added the generating freecad file.
PLA was used, 15% Infill but i think basically everything will work.