1 / 3
DMX Terminator Endcap
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Public Domain
I don't want to link neither ebay nor amazon but i basically got the "cheap" black metal xlr plugs, they're mostly sold in packs of 5 &10
The threads on the metal housing are m17x1.0 or at least they fit well enough.
Since the cap and strain-relief also act as a back-stop for the plug-insert i chose to have reduced clearance for the strain-relief. It gets bent a bit but there is plenty space for the resistor
Use a 120ohm 0.25W jelly-bean resistor between pin 2 and 3.
I have also added the generating freecad file.
PLA was used, 15% Infill but i think basically everything will work.