Nissan Leaf battery PTC connector cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Cover for the PTC socket of Nissan Leaf 2013-2023 batteries when re-used as stationary energy storage
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 41
- Wydruki
- 0
- Wyświetlenia
- 117
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This is a cover for the PTC connector of Nissan Leaf 2013-2023 (AZE0, ZE1) batteries when re-used as stationary energy storage. This part will cover the HIGH VOLTAGE terminals which are not used in such a case.
Improved version with strengthened wall and chamfer on the groove side, to make it more resilient in outdoor conditions.
Material recommended to print PETG or ABS. Enable supports. Use 3 or 4 walls and 30% infill for improved strength.
Use a sealer between cover base and the socket on the battery. You can print the seal in TPU, or use silicone, etc. Note: certain types of silicone are conductive while uncured. Allow the silicone to cure for 24 hours before turning on the battery.