Nissan Leaf battery PTC connector cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cover for the PTC socket of Nissan Leaf 2013-2023 batteries when re-used as stationary energy storage
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 42
- Makes
- 0
- Views
- 120
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This is a cover for the PTC connector of Nissan Leaf 2013-2023 (AZE0, ZE1) batteries when re-used as stationary energy storage. This part will cover the HIGH VOLTAGE terminals which are not used in such a case.
Improved version with strengthened wall and chamfer on the groove side, to make it more resilient in outdoor conditions.
Material recommended to print PETG or ABS. Enable supports. Use 3 or 4 walls and 30% infill for improved strength.
Use a sealer between cover base and the socket on the battery. You can print the seal in TPU, or use silicone, etc. Note: certain types of silicone are conductive while uncured. Allow the silicone to cure for 24 hours before turning on the battery.