TapeStack LEVER V2 - The tape rack with PUSH-TO-PICK FUNction
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
TapeStack LEVER V2 - The tape rack with PUSH-TO-PICK FUNction
- Ocena
- 5 / 5
- Polubienia
- 6
- Pobrania
- 32
- Wydruki
- 0
- Wyświetlenia
- 79
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
We created the TapeStack System for story cassettes and audio dramas to be stored appropriatly with a little fun factor, too.
It is made for common cassettes of the 1980s with size 109,5 x 69 x 17mm
If you are interested in all TapeStack parts click HERE. And there are more to come...
About the LEVER V2:
Some Messages reached me from users that wanted an other lever with even rounder end for more smooth reset of the PUSH-TO-PICK mechanism when pushing in the tape again.
Evoila, here it is... with smoother bigger curve. Can be used in any TapeStack rack system. Have fun!
Printing instructions:
Material: PLA
Layerheight: 0.2mm
Infill: 15%
Supports: No
Enjoy & Have fun and please post your makes, THX!