Modular charging dock for RAK WisMesh Tag
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A simple modular docking for the RAK WishMesh tag that uses the provided cargers.
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 20
- Wydruki
- 0
- Wyświetlenia
- 104
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
A simple modular docking for the RAK WishMesh tag that uses the provided chargers.
The idea is that you can snap together as many parts as you need, add a faceplate on one end, and stuff a usb hub or something in a cable box on the other end. then you can print a gromet in TPU and press into the cable box.
The cable box could use some refining, it is a bit brittle, and may be a bit small, but you can adjust the sizes by modifying the variables in VarSet in the FreeCad-file.
Most of these parts also needs to be printed with support, the faceplate and cable box should be printed in the same orientation as the main docking part for structural rigidity, and therefore requires support.