Shelf Mounted Filamet Spool Holder
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Mount Filamet™ to a shelf with this simple holder
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 4
- Wydruki
- 0
- Wyświetlenia
- 30
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Easily mount your spool of Filamet™ above your printer with this shelf mount. These brackets use M5 screws to secure to the shelf and 1" PVC with the Spool Hub to hold the spool.
The Screw Jig file is for marking screw locations for the brackets. The v2 screw jig is 100mm wide so you can mark on both sides of the jig, line up the center slit with each line, and mark the holes for drilling. A 5.5mm drill bit works great for drilling the hole in the shelf.
For our use, we use M5x30 screws and nylon locking nuts. Screw length should be adjusted as needed based on your implimentation.
Filamet™ is available for purchase from The Virtual Foundry at https://shop.thevirtualfoundry.com
More information at https://thevirtualfoundry.com/