BMW F3X Clutch Stop
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Small clutch stop for F3X manual transmission BMWs - should also fit E8X, E9X, F2X, and F8X.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 6
- Wydruki
- 0
- Wyświetlenia
- 43
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Automotive
- Licencja
- Creative Commons — Attribution — Noncommercial
This is a small clutch stop for F3X manual transmission BMWs - should also fit E8X, E9X, F2X, and F8X.
Included are models at 10mm, 12mm, 14mm, and 16mm height to suit your preference or clutch setup which may have a different engagement point. I have the 16mm installed on my F3X with a stock clutch and clutch delay valve delete.
18mm resulted in the clutch pedal switch intermittently not triggering, so I have capped it at 16mm.
Printed in QIDI 95A-HF TPU filament with 40% gyroid infill density using concentric shells and concentric solid infill. 30% and below infill density may result in a squishy feel, but YMMV based on infill pattern and preference. Lower infill density may also result in a weak snap fit peg.