BMW F3X Clutch Stop
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Small clutch stop for F3X manual transmission BMWs - should also fit E8X, E9X, F2X, and F8X.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 43
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
This is a small clutch stop for F3X manual transmission BMWs - should also fit E8X, E9X, F2X, and F8X.
Included are models at 10mm, 12mm, 14mm, and 16mm height to suit your preference or clutch setup which may have a different engagement point. I have the 16mm installed on my F3X with a stock clutch and clutch delay valve delete.
18mm resulted in the clutch pedal switch intermittently not triggering, so I have capped it at 16mm.
Printed in QIDI 95A-HF TPU filament with 40% gyroid infill density using concentric shells and concentric solid infill. 30% and below infill density may result in a squishy feel, but YMMV based on infill pattern and preference. Lower infill density may also result in a weak snap fit peg.