Counting matching models…
iPhone Stand Dock for Cupholder BMW F30 F31 F20 and many more I designed it to fit an Apple iPhone 8 in my BMW F31 cupholder. //UPDATE: Works great with the new iPhone 13, older Models as well. Hi there, I designed something special for…
A quick remix to enlarge the hole in the top of the grip. This allows for the wired variant's USB cable to easily slip through without needing to file the edge down. Also compatible with standard generic USB SNES style controllers I…
Air Scoop for a range of different BMW's. Fits right inside the grill, there is a little door which leads straight to the base of the standard intake. This scoop aims more colder air towards that intake tunnel. Therefore lowering the…
Every BMW owner knows this situation.. you're driving into some curve with about 100 km/h, your rear end goes left while you wanna go right and then it happens.. your Redbull that you put in the OEM's cupholders spills and you have a mess…
My first completely original model! This is an Ikea Skadis mount for the Nintendo Switch Online Super Nintendo (SNES) or Super Famicom (SFC) bluetooth wireless controller. It will also work with the 8bitdo SN30 or SF30 bluetooth/2.4ghz…
Printed out of PETG, 0.2mm layer height. Clicks in it's place over the busbar. Balancing wires will go out at the sides you can feed multiple balance wires through the covers to simplify the wiring. Fits these busbars:…
Terminal cover for double screw terminal Eve LiFePO4 prismatic cells (LF304, LF280K). I printed it out of PETG with 0.2mm layer height. Fits snuggly. Pay attention not to press too hard on the overhanging part of the aluminum terminal as…
Remix of original model, all credit for the design goes to the original - https://www.thingiverse.com/thing:856114 Original model caused issues when imported into Slic3r. All I have done to this model is repair issues using blenders…
The new Ver 2 can be found here: Intro This is a DIY-project for building a replacement headlight for the European (2021-2024) version of the CRF300L. I suppose the US version will also fit because the headlight looks the same. It is not…
original model https://www.thingiverse.com/thing:3402989
Wall holder for the 8Bitdo SF30 Pro controller. If other 8Bitdo pads fit please let me know as i only own the SF30. If you need one of my things printed or you want to suggest a modification on a part please drop me a message! If you…
Printed out of PETG, 0.2mm layer height. Clicks in it's place over the busbar and sits snug. It has small slot at the both sides for the balancing wire. Designed using busbars that came with my batteries from nkon.nl.
Height is 2.6mm, in my opinion looks the best when placed on wall. You can make it larger or smaller, but I assume 2mm is the lowest you can go in height. Prints flat on a 256x256x256mm plate. I oriented it diagonally on the plate to make…
I designed this cup holder organiser for my car. It holds my garage door opener, one coin, and my keys and other stuff.
Intro This is a DIY-project for building a replacement headlight for the European (2021-2024) version of the CRF300L. I suppose the US version will also fit because the headlight looks the same. It is not compatible with the new EU…
It's an 4" adapter to fit universal car speaker into original slot. Don't forget to put foam on both side for a good sound. Can be made out of wood with traditional jig saw ;) Category: Automotive
You can mount the Nintendo Switch on your 8Bitdo Controller. You need the lower Part of the 8bitdo Xtander.
Terminal cover for double screw terminal Eve LiFePO4 prismatic cells (LF304, LF280K). I printed it out of PETG with 0.2mm layer height. Fits snuggly. Pay attention not to press too hard on the overhanging part of the aluminum terminal as…
BMW F30 keychain Enable ironing for smooth finish Add wipe cube for nice color transition Colour change at 4mm 1h47m according to my slicer with ironing and wipe cube
Headgear holder for ResMed AirFitF30i CPAP mask mountable with command strips. The back slot is designed to accept the reusable command strips to mount to a vertical surface.
This is a collection of various navigation mounts which fit on my: Questions? You can post them on reddit or advrider.com If you want, you can buy me a coffee . Chigee AIO-5 Play Requires 3D-printed parts: CRF300L – HeadLite – Navigation…
If you have a few RF300 motors lying around (they are usually found in cheap toys and most commonly in DVD drives), than you can use them for good! The 5015 blows as good as original 12v or 24v but uses only 5v (you can overvolt it to 9v…
All three BMW F30 bumper covers were scanned from cars of different revisions, so one of them should definitely fit you) There is also an "eng" model, which is a scan of the 3rd lid.
It can hold up to 4pcs of 1€ and also 4pcs of 2€ coins. Might also fit other BMWs with the same armrest. I recommend printing this part in ABS or ASA.
Eve LiFePo4 LF304 Wirebox for your balance cables. Compatible with with: Eve LiFePo4 LF304 Terminal Cover Eve LiFePo4 LF304 busbar cover (nkon.nl)
Silhouette / Silueta BMW F30 335I con medidas 52.4 x 12.6 x 3 cm
Made specifically for the Raceface PF30 bottom bracket, but will certainly work with other PF30 BB's. Bearing removal still in progress! but you can use a disassembly cup to remove the bearings from the pulled out bottom bracket shells.…
This is a mount to put an F20/F30 8HP shifter in an E90 that came with an automatic. It is intended to re-use the stock rubber gasket from the original shifter. It needs supports drawn in around the nut retainers on the bottom, I do not…
If the brake line on your CRF300L gets in the way and you can't see the whole LCD, you can print this 12mm spacer, which will move brake line further away from you. 12mm spacer is maximum you can use, otherwise your brake line will be…
Venturi aerator v 3.0 Description: My original part (shown on cover image with red arrow over it) broke so I created replacement which I am sharing for anybody in need of the same thing. Atman AT-F301 water filters are really good for…
Refrigerator Drawer Divider for LG Fridge Beverage Drawer Since the LG fridge only ships with one divider for the beverage drawer, the draw fits four, and they won't sell you any more, Davoxt saved the day with his model! (go show him…
Print in a filament type that you believe can take the beating ;) Original gear are machined nylon. EDIT added 39T Helical gear to ;) Proper cad files can be found at GrabCad.…
My SF30 Pro thumbstick wore out so i decided to draw up a new one. There are two versions: flat and concave. To make up for the material not having much grip i included a bumpy texture to the stick. I find the concave version works…
I have made this quick and easily printable dual controller stand for my two 8bitdo SF30 Pros. You'll need a little bit of glue to put the top and base parts together. ;) 3MF files are with separate meshes, if you like to change some…
Part can be mirrored for both sides and it is scanned with creaform hand scanner. Fits as OEM (shown in picture).
This is a sleek 2D 3D-printable model of the iconic BMW F30 328i viewed slightly from the side. Perfect for fans of the F30 generation, this design can be used as a stylish keychain, a wall decoration, or a unique gift for BMW lovers. The…
BMW F30 M Steering wheel covers if the padle shifters are removed. Best printed in scale 0.95!
not up to scale or perfect…have fun lexus LS fan boys.
What is it? An adapter to allow the use of magnetic four-point headgear like from the ResMed F20, F30i, etc. on the Airfit P30i / N30i frame. Why? The back of my head is not well-shaped to retain the normal headgear for the ResMed…
Updated: Recreated in OpenSCAD
A 4x1 sized Gridfinity stand for my 8BitDo SF30 PROs. The gamepad protrudes slightly in the back so keep that in mind when arranging your tiles. You can see it in the pictures provided. They lean nicely against an Hettich ArciTech drawer…
Original Eve busbar for LF304
Trelock B4 FG/SSF lock holder for Ninebot Kickscooter F30. 2 x Bolt M5x20 2 x Nut M5
Recommended to print in PETG, ASA, or Nylon for durability Fits the OEM tail light with no modifications. Just replace the broken part and secure it with screws. Designed for BMW F30 3 Series (2012-2019).
Holds a quadlock phone mount in the vent without breaking all the louvers. Fits BMW F30/F31/F32 3 / 4 series UK Driver's side (Right side), may fit others. Shove it in, hook the mount over the back, tighten.
hanger to help dry a Resmed F30i mask sized for a standard size F30i frame print with 4 perimeters for strength on the hook section
Simple mount setup to adapt a BMW F30 shifter to a BMW E39 chassis - will probably suit other BMW shifters. The mount can be installed and removed without removing the centre console, only the surround needs to be removed. The top four…
The ResMed F30i frame seems to consitently break in the same place after some use ... I find this supicious as it has happened the samme way on the last 3 I had. Anyway, this fixes it (for me at least).
The model couldn't fit my printer bed so I had to cut it with Meshmixer. I wasn't confident with how my printer handles supports so I had the model cut the way it is. I had it done for my SN30 Wired pro controller so that I don't have to…
Attach your Oxford heated grips controller next to your dashboard using a simple cable tie. 2 Versions: CRF300L - Oxford Heated Grips Mount (original) Ver 1.0 Compatible with the EUR (2021-2024) model CRF300L - Oxford Heated Grips Mount…
This design is intended to use the mounting hardware already on the Pelsee and the BMW mirror mount plate. To access those screws, you need to scrape off the 4 foam pieces on the back of the unit to access the screws. Then you unscrew…
This is a custom mount for the Atomstack F30 Air Assist , designed for the Atomstack A5 / A5 Pro laser engraver. It mounts directly onto standard 2020 aluminum extrusion profiles , which are used on the A5 series and many similar diode…
Telescope Tripod leg clamp and holder for Fodenn F30 MiniPC. Compatible tripod leg diameter: 40mm (e.g. SkyWatcher steel tripod for EQ-3, EQ-5, HEQ-5) Parts needed: 2pcs. M3*3*5mm brass insert 4pcs. M3*6mm screws. This MiniPC has a power…
UPDATE: I found that the superglue gel didn't hold up for many drive cycles, maybe some sort of epoxy would be better. ----- This is a printable flange to replace the turbo inlet flange on the F30 which is usually crumbling and separated…
The project files for my custom GPU Shroud for use as reference. printable as one solid piece (needs 290mm+ printbed) or vertically as two parts. The file includes both variants. right click and split off whichever variant you want to…
Bed Side Hanger For Resmed F30i Mask and Hose attaches to the bad frame and hold the hose off the floor while you sleep and holds the mask during the day. sized for Resmed F30i standard size mask and ClimateLineAir heated tubing. Non…
Replacement hood for Fujifilm XF30mmF2.8 R LM WR macro Lens
Deutsch Allgemeines Für die meisten Lampen sind 3 Dateien hinterlegt um unterschiedliche Lampenpositionen zu realisieren. Falls bei einem Modell eine Version fehlen sollte, ist dieses konstruktiv nicht umsetzbar. xxx_90 degree_single_head…
I have made this quick and easily printable dual controller stand (high version) for my two 8bitdo SF30 Pros. You'll probably need a little bit of glue to put the top and base parts together. With my printer/filament it was a tight snap…
With this mount in combination with the Schuberth flashlight mount and a M8 x 25 grub screw you can use the mounting points on the Schuberth F300 firefighting helmet to mount your Gopro.
Printed out of ASA with shrinkage compensated, 0.2mm layer height. Clicks in it's place over the busbar. Compatible with with: Eve LiFePo4 LF304 Terminal Cover Eve LiFePo4 LF304 Wirebox
This is a wind guard for the Samsung HMX-qf30 video camera. Just cut out a piece of kitchen sponge ca. 37mm x 12mm x 12mm (1,45in x 0,5in x 0,5in). it should stick out a bit to seal up nicely. I've added a small flat surface on the bottom…
I created this cover for the Ultimea Skywave F30 and F30 Boom soundbar because when it is placed on a table and you want to press a button without holding it, it tips over. With my design, it no longer tips over and is also protected. I…
brackets to mount a Oricom UHF305 in place for your ashtray in your Toyota Hilux/Surf/4runner Gen2 1989-1995 for a slim tucked away placement and easy access 2x M2 bolts and respective washers required
Took a scan of the driver side corner of the dash of my 2004 lexus ls430. Shows the stock location tweeter grilles that are on there. In hopes to design a pod that flushes a set of 3.5 mids from alpine and have it contour to the top of…
Tried to find a adaptor for the smaller can like Redbull but no joy. Here is the design which holds the following cans and bottles easily Cans for Monster, Pepsi, Coke, starbucks, Redbull etc. 0.5 L bottles for the pepsi, coke and other…
This project includes a 3D-printable adapters that allow ResMed F30i/X30i headgear to be used with ResMed N30i/P30i masks . BOM: F30i/X30i Replacement Headgear compatible with ResMed CPAP masks Original attachment pieces from an X30i mask…
BMW F30/F31 VSHAPE COVER(ANY COLOUR)
A socket for the e13 PF30 Bottom Bracket with a 34mm hex nut I printed it in Add:North Adura PA-CF, standing up with hex nut down. 0.4 Nozzle, 7 Wall Loops, Alternating extra wall, 8 Top Layers, 35% infill, about 100mm/s. Did not crack…
For Honda CRF300L. Combination of navi/phone mount along with fairing (with mounts). Bottom mounts mountd on 3M VHB tape. Just a prototype, but worked for 260km of highway and 1000km of offroad (TET in Poland) with iPhone 11 on quadlock.…
Fixed cables are a PITA, so I wanted to make the USB cable on my fightstick detachable. I used a dremel to widen the existing notch that was used for the original USB cable. My wishlist of improvements for this are as follows A top cover…
The Logan F300-2 Pro Joiner I purchased in 2005 has developed rust in several places, and its rubber pressure foot had deteriorated and crumbled into powder. As a first step, I 3D-printed a replacement pressure foot using eSUN TPU-83A…
Air Scoop for a range of different BMW's. Fits right inside the grill, there is a little door which leads straight to the base of the standard intake. This scoop aims more colder air towards that intake tunnel. Therefore lowering the…
Height is 2.6mm, in my opinion looks the best when placed on wall. You can make it larger or smaller, but I assume 2mm is the lowest you can go in height. Prints flat on a 256x256x256mm plate. I oriented it diagonally on the plate to make…
I created this cover for the Ultimea Skywave F30 and F30 Boom soundbar because when it is placed on a table and you want to press a button without holding it, it tips over. With my design, it no longer tips over and is also protected. I…
The project files for my custom GPU Shroud for use as reference. printable as one solid piece (needs 290mm+ printbed) or vertically as two parts. The file includes both variants. right click and split off whichever variant you want to…
All three BMW F30 bumper covers were scanned from cars of different revisions, so one of them should definitely fit you) There is also an "eng" model, which is a scan of the 3rd lid.
Drawer Divider for the LG LF30H8210S refrigerator. This may fit other models (likely so in the Standard Depth MAX series), but I've only tested it in my fridge. 3mf files included and I sliced it into three sections to fit on my MK4S. I…
Die Tyreboy-Basis für den Lenker kann mit Kabelbindern fixiert werden. Anschließend wird der Tyreboy mittels Klettband befestigt. V2 use Support and Supportblocker for the Cable ties. The Tyreboy base for the handlebar can be secured with…
I printed it on a resin printer but it should be possible to print this on a FDM printer.
