1 / 4
WORX Dual Rapid Charger 20V Skadis Mount — zdjęcie 1
1 / 4

WORX Dual Rapid Charger 20V Skadis Mount

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Ultra-stable Ikea Skådis mount for the Worx 20V dual rapid charger. Easy installation and rock-solid secure hold.

Ocena
0 / 5
Polubienia
3
Pobrania
13
Wydruki
0
Wyświetlenia
45
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Optimize your workspace with this custom mount for the Worx 20V dual rapid charger, designed by TonnoSupremo. The main issue with standard pegboard mounts is wobbling during routine operations: this frame definitively solves that problem.

The engineering goal of this model is to guarantee a rock-solid anchor, allowing you to insert and remove batteries with one hand without the charger shifting, detaching, or tilting. Combining practicality, precise tolerances, and a smart locking system, it's the ultimate upgrade for your DIY corner or workbench.

Ready to upgrade your Skadis? I invite you to print it and try it out! Let me know how it works for you in the comments, share your makes, and feel free to leave any feedback or suggestions on what you would change. Your input is highly appreciated!

Absolute Stability: The design perfectly hugs the profile of the Worx charger, eliminating mechanical play. The force applied during battery extraction is evenly distributed across the pegboard.

Anti-Tilt Locking Pins: The true strength of this design lies in the two separately printed lower pins. These press-fit firmly into the main frame and slot perfectly into the Skådis board, physically preventing any lateral wobble or forward tilt.

Modular Design: The main frame, T-Clips, and locking pins are separate elements. This engineering choice allows each piece to be printed in its optimal structural orientation, maximizing layer strength.

Mounting Options

1. For Ikea Skådis pegboards: The main mounting utilizes the rock-solid T-Clip system. The integrated slot in my model is based on the excellent design by LineArcLine (Skadis T-Clip System). The mini clips included in the files are a remix by capze (Skadis T-Clip Mini Parametric). Note: The provided clips are calibrated for the tolerances of painted Skådis boards. For unfinished wooden boards, please download the dedicated profile from capze's original model.

2. For Wall Mounting (Wood/Metal/Concrete): Want to mount it directly on the wall or workbench? No problem. By inserting the plastic conversion washers (included) into the T-Clip slots, you can securely fasten the structure using standard #6 or #8 wood screws. For concrete or drywall mounting, pair the washers with common ¼" wall anchors.

Assembly Instructions

Installation takes less than two minutes. Follow these simple steps:

  1. Preparation: Place the main frame on a solid, flat surface.

  2. Pin Insertion: Take the two locking pins and push them firmly into their designated holes until they bottom out.

  3. T-Clip Setup: Insert the 3 T-Clips into the upper slots of the frame, leaving them in the insertion position (unlocked).

  4. Skådis Mounting: Mount the entire assembly onto your Ikea Skådis board, aligning the pins and clips with the board's slots. Once in position, rotate the T-Clips 90° for a complete and secure lock.

  5. Charger Installation: Simply slide your Worx charger onto the mount until it engages.

TonnoSupremo Tip for Disassembly: If you ever need to remove or relocate the mount and the locking pins are difficult to pull out of the Skådis, do not force the main frame. Use pliers to snap the back tabs of the pins and gently remove it. The main frame will remain completely intact, and you can reprint two replacement pins in minutes using just a few grams of filament!

Recommended Print Settings Designed to be printed flat on its back.

  • Infill: 15% (More than enough to ensure the required structural rigidity).

  • Material: PLA is sufficient for basic use, but I highly recommend PETG or ABS/ASA. Rapid chargers generate heat, and a heat-resistant material prevents any long-term deformation.

Tagi