Voron Trident 350 - Panda Breath Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Right Side Mount for Panda Breathe on a Voron Trident 350
- Ocena
- 0 / 5
- Polubienia
- 4
- Pobrania
- 11
- Wydruki
- 0
- Wyświetlenia
- 175
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This mod was specifically designed for the Voron Trident (tested on the 350mm spec) to cleanly and securely mount the "Panda Breath" module inside the chamber.
Bill of Materials (BOM)
2x M5x12 SHCS (Socket Head Cap Screw)
2x M5 T-Nut (for the aluminum extrusions)
1x M3 Heat Set Insert (Standard Voron size: M3x5x4)
1x M3x4 Screw
Some strong, heat-resistant double-sided tape (e.g., 3M VHB)
Assembly Instructions
Preparation: Press the M3 heat set insert into the designated hole on the right printed mount using a soldering iron.
Applying Tape: First, apply double-sided tape to the inside contact surfaces of both brackets where they will meet the module.
Mounting the Brackets: Now attach both printed brackets (left and right) to the bottom aluminum extrusion. Use one M5x12 screw and one M5 T-nut for each side.
Final Assembly: Place the Panda Breath module into the brackets, press it firmly against the prepared tape, and secure it to the heat set insert using the short M3x4 screw.
Print Settings (Recommended) Since this part is located inside an enclosed and heated chamber, it is mandatory to print it in heat-resistant materials.
Material: ABS or ASA
Perimeters: 4
Top/Bottom Layers: 5
Infill: 40% (Grid, Gyroid, or Honeycomb)