OpenGrid Rack Ears — 10inch rack and shallow-rack side mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Let's you snap OpenGrid plates directly onto a rack
- Ocena
- 5 / 5
- Polubienia
- 11
- Pobrania
- 15
- Wydruki
- 1
- Wyświetlenia
- 193
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Organizers
- Licencja
- Creative Commons — Attribution — Share Alike
OpenGrid Rack Ears — 10" front and shallow-rack side mount
A remix that lets you snap OpenGrid plates directly onto a rack, either across the front of a 10" rack or down the side of a shallow rack (350mm internal depth). Turns dead rack real estate into a proper cable-management and accessory surface using the OpenGrid ecosystem.
Variants included
10" front mount — top, middle, bottom positions
Shallow rack side mount (350mm internal) — top, middle, bottom positions
The top/middle/bottom split handles orientation so the OpenGrid snap features land correctly regardless of where on the rack you're mounting.
What you need
8× OpenGrid plates (not included — print from the original OpenGrid project)
Standard rack screws/cage nuts for the rack-facing side
Print settings
Printed in PETG. The slight flex makes the snap-fit much easier to engage and disengage without stressing the part — recommended over PLA for this reason. Standard 0.2mm layers, 3 perimeters, 20–30% infill is plenty.
What's on the rack in the photos
The cable management shown uses Underware ecosystem components mounted onto the OpenGrid surface — clips, hooks, and pass-throughs. None of those are part of this model; they're shown to illustrate what the OpenGrid surface enables.
Credits
Remix of the OpenGrid system — full credit to the original designer. This model just adapts the snap interface to rack-mount geometry.
Fusion archive and step file included.
Support my work
Do you like my work?
A like or a comment means a lot and keeps me making more.
Post your make in the comments section and on other 3D printing social media sites.
Your support helps me keep designing, fund the filament and materials needed for prototyping, and share everything for free.
Consider buying me a coffee.
Check out my other designs too!