DIY Wall Art | Chambre 003

PROJECT : DIY art: Chambre 003

FORMAT : STLs

More DIY art at : https://v-xl.art

--------------------------------------------------------

[ DESCRIPTION ]

The "Open Chambre" series is a collection of 3D-printable

sculptures released as free replication art by Tokyo-based artist V-XL (Baptiste Tavernier)

Size: 49 x 41 x 6 cm

Avg. print time: 85H.

Optimized for FDM 3D printing

--------------------------------------------------------

[ PRINT SETTINGS ]

> NOZZLE : 0.4mm (recommended)

> LAYER HEIGHT : 0.2mm

> INFILL : 15%

> MATERIAL : PLA or PETg

> STANDARD COLOR SCHEME: Black frame, White specimen, green color accents (but it is of course up to you)

[ HARDWARE ]

Frame parts need M3 x 8mm screws and M3 square nuts (5.5 x 5.5 x 2.6mm) to connect to each-other.

Smaller parts can be attached with glue.

--------------------------------------------------------

[ Print Manual ]

This artwork is divided into 19 files.

Print the 9 "Base" files for the frame. They do not need supports, but a brim or helper-disks (I prefer helper-disks) can help stabilize the base onto the printer’s plate.

Fasten the Base with M3 x 8mm screws and M3 square nuts.

Print the 6 "Inlay" files (S.C.S.: green), and glue them into the frame.
Print the Diamond 6 times, and Diamond RC 3 times (S.C.S.: green), and glue them into the frame.

Print the 3 "Orchid“ files (S.C.S.: white) and glue them into the frame.

--------------------------------------------------------

[ SHARE YOUR MAKE ]

Please share your build! I’d love to see your favorite

color combinations.

========================================================

© 2025 V-XL