246 modeli
A pot for orchids with plenty of side ventilation. The sinewave design adds a bit of texture to the outside of the pot. Large Pot Size 152mm diameter x 127mm high Small Pot Size 72mm diameter x 61mm high Print Settings Printer Brand:…
Following my other voronoi style design I created this planter. It has a nice looking voronoi pattern on sides. There are two variants - one with thick ring support on the bottom and one without for easier scaling. First one is dedicated…
Orchid Flower Decor – A graceful orchid with a modern twist, ideal for thoughtful gifts or stylish spaces. Use tree supports on build plate + fuzzy skin on outer walls. ✅ Height: 150 mm – sleek & refined ✅ Support removal needed – be…
This clip is a simple solution to help you grow your orchids or other similar plants in a straight way. Just use this clip to attach the plant to a plant stick. Printing is straight forward, I used PETG and 100% infill. PLA might be to…
Print in spiral vase mode with wide perimeter extrusions and several solid bottom layers. See my Watertight Spiral Print Profiles . If using this with a printed plant, consider printing my Potting Soil as well.
The plant support is inspired by the shape of an orchid flower. Can be used as a support for climbing plants or decoration when the plant is not blooming. Printing from PLA (two colors), without supports, layer height 0.2 mm.
Clip um Ableger bzw. kleinere Äste dort hinzubringen wo sie erwünscht sind.
This is a two-textured pot made up of two intersecting models: a model for the top, bottom and spiral stripes which I printed with side perimeters, and a model for the sweeping sides of the pot, which I printed with gyroid infill but no…
This is a simple clip for orchids or other plants. It will fit on approximately 5 mm sticks and can hold plants up to 8 mm dia. Print in PETG or stronger materials like ABS or ASA so you can bend it wide enough around the plant stems.
For universal plastic vase from supermarket (example: Kaufland orchid). Vytvořeno pro univerzální plastové nádoby prodávající se běžně v obchodě s orchidejí.
Flower pot with hex design height 90mm, diameter 100mm prints without supports
Flower planter (pot) siutable for orchids and other plants with simillar requirements. Model consists of 3 pcs - water tray, sticky planter and top ring to stabilize sticks. Enjoy
A small plant pot made for orchids and other plants requiring lot's of drainage. I've printed this using 100% infill and clear PETG filament to allow light into the roots.
What was the trigger... Utricularia jamesoniana ( more info ) is one of my favorite carnivorous plants species. In their natural habitat they're perennial epiphyte carnivorous plants growing in lowland rain forests or montane cloud…
a simple but decorative orchid vase with coaster Print instructions printing should be very easy without supports and 10% infill
This is a model designed with fullcontrol gcode . Follow the interacitve tutorial from github or use one of my pre-sliced files (S, M and L available), but be sure to alter the start and end gcode! #import packages import fullcontrol as…
STLs available for 3" and 4" slotted orchid pots. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15% Filament: PLA
Simple Orchid Pot without supports in standard proportions 13 x13 cm printed out of PETG.
Vanda orchids usually come with a stock holder that greatly restricts root growth and is very hard to remove without damaging roots. This a simple-to-print 2-piece click-together holder that has mounting holes for 1.5-1.75 mm hanging…
Small clip-together orchid holders suitable for holding very coarse substrate chunks. made them to accommodate Vanda seedlings I got. Normally Vanda grows only with aerial roots but small ones are difficult to keep that way in an…
Why I made this I grow carnivorous plants, mostly Utricularia from section Orchidioides such as U. alpina and its hybrids. These plants form tubers and stolons and hate sitting permanently wet, but they still need constant moisture.…
A design I saw first on ALL YOUR TECH channel, but he never shared it anywhere even as a pay for model. I decided to make my own version. You should be able to put the soil directly into this pot without any other method of containment,…
quasar · orchid planter modern minimalist orchid planter designed for airflow, that sits elevated on wrap-around plate dimensions in mm: 100mm height ~ x: 119 · y: 119 · z: 100 80mm height ~ x: 95 · y: 95 · z: 80 important · make sure…
Introducing the meticulously designed Orchid Basket, a perfect blend of aesthetics and functionality. Crafted with precision, this model boasts an intricate lattice structure that not only adds to its visual appeal but ensures optimal air…
Great pot for orchids and succulants. Scales nicely from 50% to 150% Feet are printed separately and can be snapped onto bottom drain holes if you need them.
Orchids in nature tend to grow on the branches of trees. As a result, they need light and oxygen around the roots. Most store-bought planters don't provide the correct environment, and plant health suffers. I designed these pots to…
Vase for orchids designed for an 11 cm flower pot. I printed with a setting of 0.2 mm STRUCTURAL on MK4 without supports. I used filament https://www.prusa3d.com/product/prusament-pla-viva-la-bronze-blend-970g/ .
A blank, matte-white orchid model crafted for delicate customization. This DIY collectible captures the graceful elegance of the orchid in a minimal, smooth form—perfect for artistic expression, refined decor, or thoughtful gifts.
Image of an orchid under the moon. Image was generated in Midjourney and painted in Hueforge The prompt used was: “orchid, high contrast colors, moonlight, cartoon, cel-shaded art style” I am still learning how to measure transmission…
I remixed the pot found at https://www.thingiverse.com/thing:2181381 into an orchid pot by utilizing the hole generation technique found at https://www.thingiverse.com/thing:607195 and applying it to the former model. I think the result…
My wife is trying to keep orchids and have them flower again. You may know that it can be a difficult task. I made this pot to help her keep the roots from rotting due to lack of airflow. So far these pots have been working out great.…
An orchid pot remixed from my parametric wicker cup , plus a drip tray. The open mesh of the wicker pattern helps keep the orchid properly aerated.
My wife thought the "Curvy Pen Pencil Holder" by SpaceDog3D would make a good orchid pot, but it needed drainage in the bottom. This is the result. Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution:…
A graceful orchid-shaped jewelry stand, perfect for holding rings and necklaces. Ideal as a desk décor and organizer.
Should print just fine with no supports, lower layer height is better. All of my prints have been in PETG so far with no issues other than a little ugliness on the underside of the overhangs. Works well when filled with orchid bark,…
Small orchid and plant clip. Typically used to quickly and easily attach an orchid flower spike to a stake, it can also be used for other plants both indoor and outdoors. Uses a basic compliant mechanism to ensure that the clip returns to…
Orchid roots need oxygen and can grow out the top of a solid pot and if a pot only has holes in the sides then the roots can grow through and make re-potting difficult. With this pot air can get to the roots and if they grow through the…
Un pot pour plante, la taille est pour un petit pot d'orchidée mais vous pouvez l'agrandir sans soucie.
This is my take of a self-watering orchid pot. The evaporating water increases the humidity in and around the pot. Large and small version in 100mm and 120mm (inner pot size) The outer planter is printed in vase mode, is optimized for…
Prints without support. By default the flower pot has a height of 160mm and a maximum (outer) diameter of around 133mm. As seen in photos I printed in dimension 1:1. Please note, that it is not designed to be printed in vase mode. If you…
A nice airy orchid basket, good for many genera. Print instructions Category: Outdoor & Garden
Trying out different twisted designs, this turned out pretty well Category: Household
I created this insert for my orchid so I could transfer pots. I couldn't find any inserts I like, so I made this one. I used PLA+ and sized to fit my flower pot. The file should be fairly easy to scale to fit your flower pot. The print…
A new 3D figurine generated by AI, a great orchid. Do not forget to LIKE, to download and to upload your makes, thanks ! My print is not very good, printed it too small, with an old printer ;-) Powered by Image-to-3D from MakerWorld…
Orchid pot I made for my wife, enjoy! Size: Base: 120mm Top: 160mm Height: 120mm --------------------- Printing configs: Suports: No Material: PLA Infill: 10% Brim: No
Good for orchids with creeping rhizome that need the extra width to grow into such as a small Cattleya (Catt. aclandiae pictured). This basket is decorated with a classical Chinese swirl pattern. Print instructions Category: Outdoor &…
A small wall planter for Phalaenopsis orchids to provide a more "natural" way of hanging. I had to scale it down to fit on my printer.
UPDATE 8-19-25: I added a pot with a smaller drain hole and trays with deeper cut-outs. YOU CANNOT SELL THIS MODEL! Elevate your orchids with this stylish pot! Complete with a catch-all tray for drainage and spilled soil. Scalable for…
Fits a small orchid to hang it on a wall. Vent holes are not centered because Im still figuring out how to use Shaper3D.
I changed the size of the original model : . Height : 12cm . Top diameter : 12cm . Bottom diameter : 9,4cm and I added a saucer. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.20mm Infill: 100…
Simple vase modeled after the Lego Orchid set. Very nice, should hold water if printed at a good setting. In order to keep things safe, I set my printer to 0.2mm layer height in PrusaSlicer and it ran for nearly 25 hours. This is a great…
This is a decorative basket for orchid plastic pot in which the orchid is sold. Honeycomb sells allow orchid roots get enough light. Orchid_basket_T106xB86xH111_v1.STL Bottom inner diameter: 86mm; Top inner diameter: 106mm; Inner height:…
Use these fondant cutters to form a beautiful orchid. I always use the greentec-filament because it can withstand temperatures up to 115°C and is easy to clean. Of course, any food-safe material can be used. Nutzen Sie diese Fondant…
This model is designed for two-color printing, with the flower and stem separated for a clean visual contrast and easier printing. The flower is connected to the stem using a printed joint for easy assembly and correct alignment. Test…
Unfortunately, we have not had much luck with our orchids in the past. When you buy them at our place, they come in the transparent pots but also immediately in a ceramic cachepot. As amateur, you take it as it is, but after the near 100%…
Designed here is a basic orchid basket to allow proper airflow and drainage around your orchid's roots that will fit inside a preexisting pot. Size can easily be adjusted to fit any outer container you please. Easy to fill with orchid…
This is an aerated planter for orchids. Print all three parts. The middle part should be printed translucent since the roots need light. Assembly The bottom part and middle part are clamped together. Pin a thick cord in the middle of the…
0,48 line width Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Doesn't Matter Resolution: 0.25 Category: Decor
A dry environment is not comfortable for your plants but with this tray you can increase the humidity up to 90%! You can control the degree of humidity by managing the amount of water, you can add just a spoonful of water or fill the…
I made this simple support for my flower. Can be used for hoya as well. printed on Creality CR 10 S5 laying flat. No support, concentric infill to prevent lines in between when travels. NOTE: the clips on the main picture is not my…
This cute planter is perfect for an orchid. I print them with 3 wall loops, and 15% gyroid infill.
A pot for an orchid. Created at the request of his wife.
A simple pot for an Orchid. Inside dimension is 58.5mm, height is about 150mm.
Great for getting lots of air to your orchid's roots 105mm diameter, 65mm high (excluding feet) Also available in small and large sizes. Print instructions Category: Outdoor & Garden
A remix from low poly vase. Made the holes to make the orchid thrive. Smaller in the bottom and bigger upwords so that orchid-moss doesn't fall out. Category: Household
Made it to print without supports, 250mm tall to fit most off the shelf printers, stretch it wider or taller for different geometry
One orchid with two stems or more than one orchid in one pot? If you want a to hold the trellises parallel you might want this little helper. Print instructions Category: Playsets Print Settings Printer Brand: Prusa Printer: Prusa Mk2…
Idea based on https://www.thingiverse.com/thing:2564910 But completely redesign For the moment diameters available : 90mm - 25 stick 100mm - 28 stick 120mm - 30 stick You will need to get Popsicle Sticks you can find on aliexpress for…
-26Feb2023 Hi everyone, The stick and semicircle end is meant to support the flower stem of the orchids, and avoid the bending of the plant when blooming due to the flower's weight. It is modular, so just print and assemble as many as you…
This is an excellent orchid pot. I found that the top rim of the original design was a bit too fiddly to install, so I simplified it. Kudos for chrido for an excellent design. Print instructions Use the original base, center and…
A remix from my triangle-low poly planter. This uses a different "relax" method. Category: Household
Used Nomad Sculpt to create a standing model of an orchid inspired by the vanilla bean orchid. Printed using Prusa MKS3+ with MMU3 at 0.2mm layer height. Used Overture PLA (Yellow, Chocolate Brown, Olive Green) with full supports made of…
A pot designed for Orchids with a base with a slight step in it to centralise the pot.
Great for getting lots of air to your orchid's roots 138mm diameter, 85mm high (excluding feet) Also available in small and medium Print instructions Category: Outdoor & Garden
Designed in a mixture of mesh tools and Fusion360 this was harder to get to work than I'd like to admit, but i'm pleased enough with the result to share it. Multi-color done in the slicer with a height modifier.
I designed this for growing my Tolumnia orchids but it'll do a good job for any small orchid which requires a lot of air circulation around the roots. 81mm in diameter, 50mm high (excluding feet) Also available in medium and large sizes.…
Sweet Orchidea .. picture generated by AI ############################################################################# Print at 100% infill with a layer height of 0.04mm with a base layer of 0.16mm Filaments Used: PLA JakobFIlament Black…
a open flower power pod for orchids. i own only only so no idea jet if this is optimal Print Settings Printer: Tronxy X5S MGN Custom Rafts: No Supports: No Resolution: 0.2 or lower Infill: 20%+ Filament: Noname PLA Transparent Notes: make…
Automated active self-watering orchid system. Orchid is placed in the top half, the bottom is filled up with water. A lid separates the two parts. At set day intervals, the water is pumped up and soaks the orchid for 2 minutes before…
I made this vase for orchids as they like to have it dry and "airy" My printer is not that good for these hollow structures but ill hope I manage to tune it for abs sometime and smooth it down with acetone. Category: Outdoor & Garden
Model resized/remixed based on following thingiverse model: https://www.thingiverse.com/thing:4580757 Couldn't find a copy here on printables. Great for larger orchid plants with a well developed root system. Just be careful not to upsize…
A large pot for orchids could be scaled down if needed. It will need rubber feet or to be put onto a drainage tray for water drainage. Seen pictured with a Banfieldara orchid.
Thin and easy to print orchid pot and tray. 130% size is around the avarage pot size. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 280 Infill: 20 Filament: PolyMaker PLA Category: Outdoor…
The Kakapo's Orchid Planter for Oversized Orchids The planter was born as a solution to save our dying orchid. It needed space and the old plant pot wasn't going to fit it. This 6-inch beast is not only satisfactory for the orchid but is…
This is a plant pot holder, attachable to windows through adhesive strips, e.g. to hang orchids on the window pane. It's sturdy enough for lighter plants, like orchids. I've used two Pattex adhesive strips, 20x40mm (1mm thick)) per pot…
Better design without the need for support
Print upside down WITHOUT SUPPORTS, bottom hole will bridge across giving support for the rest of it. Cut out the thin disk when finished. Available on etsy here: https://www.etsy.com/listing/871836894/fuuran-pot-orchid-planter-3d-printed…
Basket for orchid with hollow bottom so you can water it from bottom
This orchid pot can be hung from the back of a monitor to make it a key feature in your desk setup. The measures were taken from a Lenovo monitor in the vertical position. Disclaimer: Do not water the plants when hanging to avoid dripping…
This orchid pot should be printed in vase mode and should use transparent filament, because I had information that orchidea needs sunlight even for it's roots. Also it's just brittle shell for watering, but maybe it could work as pot on…
orchid pot to fit around standard sized orchid
A simple Orchid pot for IKEA MUSKOT 9cm that can be printed in spiral vase mode. The pot will rest on the inner lip/ring of the planter and floats around 2cm above the ground. It features a nice hexagonal pattern at the bottom for…
Saucer under the famous orchid pot - "Orchid stone vase".
Here is a bottom holder Orchid pot. It work with classic transparent pots (diameter: 85mm). The top isn't required. Hope you will love it. EDIT : New light version with less PLA. No need support to be printed or to be waterproof! Enjoy…
Diese Rankhilfe habe ich für meine Haltestangen selber entworfen. Sie sind für 3mm und für 4mm Stangendurchmesser. Die Halteöffnung habe ich mit Absicht größer gestaltet, weil alle Halterungen die original bei den Orchideen sind, den…
