Orchid support
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
orchid flower stem support
- Ocena
- 5 / 5
- Polubienia
- 16
- Pobrania
- 100
- Wydruki
- 1
- Wyświetlenia
- 931
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Attribution — Noncommercial
-26Feb2023
Hi everyone,
The stick and semicircle end is meant to support the flower stem of the orchids, and avoid the bending of the plant when blooming due to the flower's weight.
It is modular, so just print and assemble as many as you need to reach a nice height for your plant, if needed use a drop of glue to lock them. Once assembled, stick it inside the pot and put the flower stem inside the semicircle. Be careful and avoid damaging the roots.
I used a 0.4mm nozzle and a layer height of 0.28mm.
-27Feb2023
I removed the older files since the layers were separating due to thin walls. I made the tower thicker and changed the coupling shape to a triangle instead of a hex.
Hope this works better for you.