1 / 1
XL Allen keys / Imbus holder for Lidl PARKSIDE pegboard (simplified V2) — zdjęcie 1

XL Allen keys / Imbus holder for Lidl PARKSIDE pegboard (simplified V2)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is an even more simplified version of the Allen key / Imbus holder for bigger sizes (5 slots).

Ocena
0 / 5
Polubienia
3
Pobrania
6
Wydruki
0
Wyświetlenia
55
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Garage
Licencja
Creative Commons — Attribution

🛠 XL Allen keys / Imbus holder for Lidl PARKSIDE pegboard (even more simplified version with 5 slots)

This is a simplified, sleek remix of the Allen key holder, specifically redesigned for the Parkside/Lidl plastic pegboard system.

⚙ Print Settings

  • Orientation: Print it upright, flat on its base.

  • Infill: 5% to 10% Rectilinear works perfectly and keeps the print light yet sturdy enough for a full set of heavy keys.

  • Supports: I highly recommend using organic supports for the mounting pins to ensure they print perfectly clean and fit smoothly into the pegboard holes. If the pins feel a bit too snug, a very light sanding will make them slide right in.

  • Material: PLA / PETG

  • Print Time: Around 1 hour and 15 minutes (depending on your specific printer speed and layer height profiles).

I have included single file and a single file with pre-set helper-plates.

Hope it will be helpfull and Happy printing! 🖨🍀

Tagi