Liczymy pasujące modele…
When I first downloaded the original file from Thingiverse, it contained over 50 files, with only one or two being the actual Benchy file. For your convenience, I added only the STL file, a pre-sliced GCODE file, and a photo of the product.
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
https://www.tinkercad.com/things/gUczxpEbC99-figure-drawing-v1-alpha I figured that the original could use some work. It was good, but not quite perfect. This is my first take on it. Quite outdated, and not where I want to settle. But…
A 1:48 Scale Tactile Warning Surface with a Simplified Pattern
Credit on Printables to: @ IDVx Consulting @ GunplaMark I have remixed and simplified the prior designs above: Revised the filament exit Revised the base and rollers to be one piece with integral desiccant bin. Left off the hydrometer and…
A minimalist model of an acoustic guitar. You can hang it on your xmas tree or just use it as a decoration. Supports: Yes On the neck of the guitar Keep in mind: for the original model, a needle is nessesary to push the thread through the…
There's space for a 6x3 magnet in the base, but if you don't need one just don't worry about it and print as is.
I cut off the original's curved sides (using the CG modeler Lightwave 2015) so it could be rotated and printed flat, and removed a big chunk from the middle to save plastic and make it print fast. Very little support is needed for this…
This is a simplified 3D model of the iconic Audi Quattro Rally car, designed with smooth contours and reduced fine details to make it perfect for mold-making. Ideal for creating soaps, cakes, chocolates, resin castings, and other crafts,…
This is a simplified 3D model of the classic Austin Mini Cooper, designed with smooth contours and reduced fine details to make it perfect for mold-making. Ideal for creating soaps, cakes, chocolates, resin castings, and other crafts, the…
This is a simplified 3D model of the stunning Bugatti Chiron, designed with smooth contours and reduced fine details to make it perfect for mold-making. Ideal for creating soaps, cakes, chocolates, resin castings, and other crafts, the…
This is a simplified 3D model of the iconic Ford Mustang Shelby GT500, featuring smoothed-out body lines and reduced intricate details for effortless mold creation. Perfectly suited for crafting soaps, cakes, chocolates, resin art, and…
This is a simplified 3D model of the high-performance Koenigsegg Agera, designed with smoothed-out curves and fewer intricate details to facilitate easy mold creation. Ideal for producing soaps, cakes, chocolates, resin castings, and…
This is a simplified 3D model of the striking Lamborghini Aventador, featuring smoothed-out body panels and reduced fine details to make it perfect for mold-making. Ideal for creating soaps, cakes, chocolates, resin castings, and other…
This is a simplified 3D model of the legendary Lamborghini Countach, designed with smoothed-out iconic lines and reduced fine details to make it perfect for mold-making. Ideal for creating soaps, cakes, chocolates, resin castings, and…
This is a simplified 3D model of the extreme Lamborghini Veneno, designed with smoothed-out aerodynamic lines and reduced fine details to make it perfect for mold-making. Ideal for creating soaps, cakes, chocolates, resin castings, and…
This is a simplified 3D model of the iconic Lancia Stratos Rally car, designed with smoothed-out contours and reduced fine details for effortless mold-making. Perfect for crafting soaps, cakes, chocolates, resin castings, and other…
This is a simplified 3D model of the extreme McLaren Senna, designed with smoothed-out aerodynamic bodywork and reduced intricate details for easier mold creation. Ideal for crafting soaps, cakes, chocolates, resin castings, and other DIY…
This is a simplified 3D model of the exquisite Pagani Zonda, featuring smoothed-out aerodynamic lines and reduced fine details to facilitate easy mold-making. Perfect for creating soaps, cakes, chocolates, resin castings, and other…
This is a simplified 3D model of the iconic Porsche 911, designed with smoothed-out classic lines and reduced fine details for easier mold creation. Ideal for crafting soaps, cakes, chocolates, resin castings, and other DIY projects, this…
This is a simplified 3D model of the distinctive Renault 5 Turbo Rally car, featuring smoothed-out aggressive contours and reduced fine details for easier mold creation. Ideal for crafting soaps, cakes, chocolates, resin castings, and…
This is a simplified 3D model of the luxurious Rolls-Royce Phantom, designed with smoothed-out elegant contours and reduced fine details for easier mold creation. Ideal for crafting soaps, cakes, chocolates, resin castings, and other DIY…
This is a simplified 3D model of the iconic Subaru Impreza WRX Rally car, designed with smoothed-out aggressive lines and reduced fine details for effortless mold creation. Ideal for crafting soaps, cakes, chocolates, resin castings, and…
This is a simplified 3D model of the beloved Volkswagen Beetle, designed with smoothed-out classic curves and reduced fine details for easier mold creation. Ideal for crafting soaps, cakes, chocolates, resin castings, and other DIY…
Print Settings Nozzle: 0.4 mm Layer height: 0.15 mm Support: No Avoid crossing perimeters: Yes First layer speed: 10 mm/s Z-offset: −0.05 mm Bed sheet: textured (satin) recommended Notes For Casio MRW-200H . Removing or installing the…
A simplified Kancil K4 Air Vent that should be compatible with cell phone air vent mounts; the original adjustable louvres prevent cell phone mounts from attaching. Requires the rear part of the original air conditioning vent, it only…
Single print with snap-in barrel feature
This is a simplified 3D model of the Heltec T114 module. It is designed to be used as a reference when creating custom enclosures or for placement in larger projects. The model captures the essential dimensions and shape while keeping the…
If you are like me and bought Silicone Wipers for the A1 Mini, @Dutch, @Herc or @Plastic's solutions won't work for you as the former appears to acquire some little mounting plate thing (?) while the other two support only the A1 Silicone…
I liked the concept of the Core One/+ Magnetic Top Cover, but I felt the tab handles were too big. There were other handles available, but I wanted the handles to be on the side, not protude past the frame of the Core One, and complement…
Remix of the Spray Bottle Holder by zhollis21 and Ellrico in an attempt to make it simpler to print and improve strength. I like the simplicity of the base design but was not fond of the snap-in honeycombs and how they complicated…
I made a small number of changes to this case to accomodate a slimmer profile. printed at 110% size it fits S&W M&P, and beretta 92fs or M9
When I first downloaded the original file from Thingiverse, it contained over 50 files, with only one or two being the actual Benchy file. For your convenience, I added only the STL file, a pre-sliced GCODE file, and a photo of the product.
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
Balloon racer with simplified air ducts and axles + exhaust mouthpiece added for easy inflation with balloon attached.
roughly to scale (excluding the single family houses) some of them need supports find lucas oil statum here: https://makerworld.com/en/models/1813781-lucas-oil-stadium?from=search#profileId-1935258
Easy to install mitetrap. Fill with oil to stop mites reaching the animals on bar Extra materials needed: Screws and metal bracket of choice
This is a remix of a coin sorter tray that can handle the 5 higher value Euro coins. Print with standard settings. It doesn't need supports.
I removed the side grip panels and smoothed and rounded the body and bottom of the grip to use on my Alchemist Nerf build
M-30 HOWITZER: SOVIET 122MM M-30 FIELD HOWITZER model. Scale approx. 1:18. Original Designer Assembly Instructions: To secure the wheels to the axle, use 2 screws 3x16mm (diameter and length without head), with washers with a diameter of…
THERE IS NO CAD FILE. I hacked these together in TinkerCAD. Plano 3700 series are cheap and readily available. The 3-28 model is usually less than $6 at Walmart. See my original remix for more information about the Plano 3700 series…
Quickly and easily clamp all the small things with these spring-powered parallel clamps. I made an effort to keep the design simple with easy to print parts while updating the CAD to match other SuperMod clamps. You can find an up-to-date…
The basic character from the Oversimplified videos. Go check out their work on: (57) OverSimplified - YouTube .
An Ames lettering guide is the best friend of anyone hand-drawing blueprints or lettering comics. It easily makes consistent guidelines for words anywhere on a page with the help of a T-square. A full guide is generally transparent…
Easy to print F1 car simplified Pla Abs petg Tpu are good for this print No supports Njoy Below is the link with all my designs https://www.printables.com/@SotKon_345789/models
The simple, yet quite elegant, straight forward design of the wire brush holder by Clemi pretty much convinced me. However, I consider the T-Nut approach overdone for this holder which is otherwise simple. So I replaced the T-Nut fixture…
Also added a combiner at the top. Category: Kitchen & Dining
F&F CLG-13T hour counter simplified model (with or without bracket) STEP files and Solidworks(2022) files available.
Hardware 4x M3x12 Button Head Screws : to fix filter to enclosure 4x M3x12 Button Head Screws : filter assembly (i.e., mount box to cover) 8x M3 Square Nuts Versions 0.3Q: Designed for printing at 0.3mm Quality with a 0.6mm Nozzle 0.2Q:…
Hey! Ive edited the original design from the HEPA & Carbon air filters. I experienced it was a bit messy to take out the Carbon tray. It was hard to close and once you put it verticallly in the filter, all the carbon pieces fall down and…
First off: Shout out to the creators of the Ender 3 NG. Thank you for creating this conversion and providing the BOM and printed parts. Info on E3NG project: https://rh3d.xyz/ What is this: The goal of this rework was to simplify the…
Simplified version of "water meter / Wasserzähler - AI-on-the-edge by jomjol" with cutout for a lid. I had problems printing the bayonet mounts and therefore created this simplified version. Post-Printing The lid may need to be glued on…
Printed Example in images was printed as follows: Printer: Voron V0.2 Time: 28min, 57secs. Including heatup of 190c→255c (HE) & 80c→100c (BED) Including homing sequence (No probing) Material: ABS, ‘ Void Black Catyarn ’ Layerheight:…
Credit on Printables to: @ IDVx Consulting @ GunplaMark I have remixed and simplified the prior designs above: Revised the filament exit Revised the base and rollers to be one piece with integral desiccant bin. Left off the hydrometer and…
I like Exerqtor's concept, but I wanted a simplified version. The functional changes are to not use the UM2 style connector and instead have an opening that has a 50 mm radius to avoid pinching the tube, and no bearing. Note that the…
just centered the holes for 2040 extrusions for the Daniel Payne model. Ender 3 NG Simplified Top Rear CoreXY/Motion
Shortened length of end part to make it easier to connect. Simplified the design to allow upside down printing. Print Notes: Orient upside down. Use plate supports for snap lips. If you plan to print high temp filaments, print the…
Simplified design for easier printing. Slightly adjustable. Directs tool lead up without the use of a zip tie. Print Notes: If you plan to print high temp filaments, print the component in a high temp filament.
Introducing my Jinx Chompers! Update: Decided not to opt for a paid file. This is my first proper upload! Changed to Simplified and Enhanced Versions. Both available for free. Please give me some feedback on the design :) Designed with…
The logo of YouTube channel, OverSimplified. https://www.youtube.com/c/OverSimplified
Put together your own little western train The 4-4-0 is an icon of railroad history. I created my own version as a tribute and based it on the shape. The somewhat comic-like variant allows you to put together your own little train. There…
Put together your own little western train The Sattle Tank locomotives are pure workhorses that help to create space or move wagons over short distances. There are also 2 wagons that transport either timber or livestock, which can be used…
Based on Unifi USW Flex Mini Wall Mount - simplified. Adjusted to fit the Unify USW Flex Mini 2,5G
A minimalist model of an acoustic guitar. You can hang it on your xmas tree or just use it as a decoration. Supports: Yes On the neck of the guitar Keep in mind: for the original model, a needle is nessesary to push the thread through the…
There's space for a 6x3 magnet in the base, but if you don't need one just don't worry about it and print as is.
Based on the extraordinarily accurate model created by Thingiverse user kimgooni . I did some small invisible simplifications on the model to save a couple of hours of printing support structures. It results in 16 hours of printing with…
I remixed the Design by NotaBrick by simply removing the openings for the GPIO and the Ribbon-Cable-Connectors since i didnt needed them for my project.
Remix of these models: https://www.printables.com/model/96792-filament-clip-holder https://www.printables.com/model/84113-simple-universal-filament-clip-v3
Model simplified to print faster and improve the thickness of the phone that it can hold. While I thought the designs on the original model were cool, I needed a couple of these for around the house and didn't care too much about looks.…
Simplified BetaFPV Pavo Pico mount for O4 Air Unit (Lite) without carbon cross
4/17/25 im removing the old version since it makes no sense to have a complicated mess when the new one is so simple 4/15/25 Iteration is always good, I've simplified it even more and have improved cooling. so this is the final I also…
Changed the Band aid tray to remove the clip system. Plus adjusted tolerances slightly to to fit better.
Simplified indicators for the inner part of the bevel protractor. Easier on the eyes to have a single indicator at 0.
If you want to download the textured model, it is available for free on ArtStation and Gumroad . This is an accurate recreation of the 12th Doctor's (Peter Capaldi) TARDIS (F/G props) from BBC's show "Doctor Who". This is a simplified…
This is a simple but fairly accurate reference model of the Flipper Zero and its silicone case/sleeve. I made the model for the case, but credit for the simplified Flipper model goes to s0ko1ex.…
This is a joke award from the Military as Blue Falcon is slang for Buddy F***er. As the previous model required a lot of supports and would constantly fail. I've split it into a few different parts. Because of this you can now orient your…
Zombicide simplified Police car, to use with original token & printable in less than 30 minutes. I wanted to print @kap42 police car, but with a simplified design, to make it printable in less than 30 minutes and specially without havin…
Zombicide simplified Pimpmobile, to use with original token & printable in less than 30 minutes. I wanted to print @kap42 Pimpmobile, but with a simplified design, to make it printable in less than 30 minutes and specially without havin…
I have a larger printer (voron 2.4 250) and had zero interest in using a bunch of screws to bolt the pieces together. I also didn't like the lack of drainage, and the need for supports where the pieces are supposed to stack. This prints…
If it happens that the “hole puncher” in your water dispenser broke down, here is the STL you need !
I cut off the original's curved sides (using the CG modeler Lightwave 2015) so it could be rotated and printed flat, and removed a big chunk from the middle to save plastic and make it print fast. Very little support is needed for this…
Modern Simplified F1 Car with removable tires. Customize the car with interchangeable slick or wet tires. Each tire features a thin slot that can be painted/colored to indicate a specific tire grade (Soft: Red, Medium: Yellow, Hard:…
This design contains three parts: A Leg, a join-clips and a rubber feed. Instructions: You will need four legs, Two or three join-clips and eventual four rubber feeds. Assemble the parts by clicking the legs into the join-clips and put…
Can use M3 nuts and M3 bolts from 16mm to 30mm in length. The mesh is from the slicer settings: set the top/bottom layers to 0, infill at 6.5%, infill line multiplier at 3. Adjust based on preference.
this is a simplification of my earlier squeezer. now you only nee print 3 parts instead of 4 the only thing is the when you start to roll up the tube you need watch that the winder doesn't pop out front the gear. just hold the winder…
2025-03-24 Added the right side. Optimized the supports. 2025-03-23 Added the left side and supports.
and yeah it's also doable on 1 color 3d printers. pause and then manually switch the filament
A basic model of Pod 042 the hovering little robot companion from the videogame NieR Automata the model is full scale but it can be scaled down or split up for easier printing all features are sized to be printable with a basic 3d printer
Simplified Bunny To celebrate and decorate for Easter I made this small decorative bunny (Bunny approved) Scale this model to however big or small you would like it. For small scales I do recommend to include a brim.
Simplified version of the original to allow for support free printing in any orientation.
Rugged Box - mesh simplified for remixing I use Blender for modelling, and really like this simple, yet versatile rugged box for many of my projects. As Blender operates on a mesh for imported STLs, redimensioning and moving features…
The idea is this is a simple passthrough (flanged on one side), that can be glued or taped in place on millwork doors, etc. The version I printed is 125% in X/Y coordinates, which makes it about 6" height and width.
Ford maverick pickup truck scan simplified from ~1mil kb to ~10k kb
This is a simplified of the circular mounting base for heliochronometers. It allows one to mount the sundial to a head leveling base or tripod ball to greatly simplify leveling. You will need to thread the base with a ¼"-20 UNC tap to…
This is a very first and a very simple design I made. I planned to use it as a simple Tower / Castle figure in one of my boardgames. Printed on MK3S+ , with PLA in 0.3mm as a draft and proof of concept. No supports needed. Used brim,…
All original design credit belongs to the creator — this is a personal modification and sharing only. (dmrn210) This is my personal modification of the original SLS10 slingshot: I extended the fork tips and added pass-through holes,…
The models on BTT's Github are way too detailed for most work. Part of this is the fact that their CAD package inscribed lettering on most of the individual parts. There were a lot of 89.9995* angles in the original models that gave me…
The detail for the baby mat is a simplified model
MZ4250 is amazing. Probably objectively the single best mini creator by volume, cost and quality of work. I'm running a Curse of Strahd campaign and in Kresk there is a little Gazebo by a magic pool so of course that Gazebo needs to be…
English The bike's front star protection simplified model is available in 2 versions: 1) the distance from the mounting hole to the edge of the protection is 30 mm. and a riveting attachment that needs to be melted and pressed down. 2)…
This prints with alot of supports underneath the truck, i suggest using long thing pair of pliers to pull. Also the boom and bucket portion can break easily if supports are pulled hard in smaller sized prints.
![[Prusa] Box HEPA Filter Enhanced (Noctua NF-F12 fan simplified assembly remix)](https://media.printables.com/media/prints/1005698/images/7657099_301ea5eb-4ce6-479c-9c70-ddb77f9bb107_3104ba46-99d3-4ce4-b7f3-2122cac535f5/hepa-filter-03q-print-orientation.png)
![[PythonSCAD] Vernier bevel protractor with simplified indicators](https://media.printables.com/media/prints/1164590/images/8773593_7a6f09dc-3a57-439a-b953-9e1c4ab40ac8_2f110c75-6368-4bba-811c-7e080de4c8d9/capture.png)
