1 / 2
Magnetic RunCam Thumb2 / ActionCam mount on Velomobile hood (FreeCAD) — zdjęcie 1
1 / 2

Magnetic RunCam Thumb2 / ActionCam mount on Velomobile hood (FreeCAD)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Non permanent mount for the camera on the hood.

Ocena
0 / 5
Polubienia
0
Pobrania
2
Wydruki
0
Wyświetlenia
39
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Intended for the TPU camera holder (incl. bolt & nut), that comes witch the Thumb2. Use Ø 12 mm × 6 mm N45 magnets for the outer part (ActionCamMount) and Ø 12 mm × 8 mm for the counterpart.

Print in TPU to protect the velomobile's paint, 0.2 mm layers.

Bonus

I've added a more sturdy version of the camera mount that should be suitable for (not too heavy) standard actionCams. Use M5 bolt, nut and washers for this. Be aware that this is not tested. 😉

Tagi