Suzuki JIMNY 32 Scale
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A highly detailed, 1:32 scale model of the iconic Suzuki Jimny. Features clean geometry and smart parts breakdown.
- Ocena
- 5 / 5
- Polubienia
- 7
- Pobrania
- 68
- Wydruki
- 0
- Wyświetlenia
- 335
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Vehicles
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Introduction:
Welcome to your next mini adventure! The Suzuki Jimny is an undisputed off-road icon, loved worldwide for its boxy charm, rugged reliability, and go-anywhere attitude. This 1:32 scale model captures the unmistakable spirit of the legendary 4x4, designed from the ground up for a seamless 3D printing experience. Whether you are looking for a quick weekend build, a blank canvas for custom weathering, or a brilliant desk companion, this little Jimny is ready to hit the (miniature) trails.
Parts to Print:
Print the parts as per the list. Use recommended colors for best results.
PART NAME | COLOR | QUANTITY |
|---|---|---|
Body | color | 1 |
Bonnet | color | 1 |
Chassis | black | 1 |
Fog Light | white | 2 |
Grill | black | 1 |
Head Light | white | 2 |
Indicators | red | 2 |
Radiator Grill | black | 1 |
Rear View Mirror LH | black | 1+1(mirrored) |
Rim | color | 5 |
Roof | black | 1 |
Spare Tire Holder | black | 1 |
Steering Wheel | black | 1 |
Tail Light | red | 2 |
Tire | black | 5 |
Print Process:
Position the parts in slicing software with orientations shown in following images. Correct orientation is important for printing without additional supports necessary.
Mirror "Rear View Mirror LH" for CargoBed_Side_RH in slicer software before slicing. Check the print tolerances for Rim and Tire, if using non TPE material for tires.
Still if you have any query regarding model files, please comment your question.
Colored Parts:
Black Parts:
Print Settings:
he model is designed for printing with a 0.4 mm nozzle and requires no additional support. Use the printer-specific settings for the best quality prints.
Layer Height: 0.2 mm
Infill: 10–20% is sufficient
Supports: Not required. Orient the parts as shown in the images above.
Material: PLA recommended;
Bed Adhesion: Based on the machine bed adhesion.
Post-Processing:
The prints may require finishing before starting assembly. The process involves removing the in-built supports, stringing if present, and smoothing the rugged edges. Also the slots have tight clearance and may require to enlarge for smooth fit. You may require the following tools as per preference and availability:
Cutter or Knife
Sandpaper
Small Files
Adhesive (Instant Glue)
Assembly Instructions:
Watch the following video instructions for assembling the model. Check for tolerances before assembly. Use the appropriate tool for sizing the joint members. The press-fitting of some parts may require force. Use pliers or a vice for fitting, if necessary. Use adhesive for a firm joint. Take necessary caution while assembling.