ShoeyCat 1.6 - deadcat frame toothpick drone
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Open prop 1.6" toothpick with a deadcat frame optimized for FDM printing
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 194
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- RC & Robotics
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
Open-prop 1.6" toothpick with a deadcat frame. Fits a 25x25 AIO and motors with a 3 hole/6.6mm dia mounting pattern (0702/0802/1002/1102). Takes 40mm props. I recommend using a BetaFPV Air canopy for weight savings.
Mine is printed out of PCCF, I have also tested PA6-CF and ABS. Despite its reputation for being brittle, PCCF has worked best in terms of rigidity and flight characteristics. Although PA6-CF is more durable, it flexes much more during flight and gave me some nasty frame resonances. Mine weighs in at 26g without a battery. Print it strong
Use this custom mixer to balance throttle performance between front and rear due to the slightly forward CG:
# back up first
diff all
# set mixer to CUSTOM (Configurator Mixer tab, or: mixer CUSTOM)
mmix reset
mmix 0 0.897 -1.0 1.0 -1.0 # RR rear, throttle down
mmix 1 1.103 -1.0 -1.0 1.0 # FR front, throttle up
mmix 2 0.897 1.0 1.0 1.0 # RL rear
mmix 3 1.103 1.0 -1.0 -1.0 # FL front
save
Stay tuned for the ShoeyCat 1.8, coming soon with 1102 motors and 45mm props.