Car & Motorbike Keys and Documents Holder – Wall Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A wall or furniture-mounted holder for vehicle keys and documents, available in car and motorbike versions.
- Ocena
- 0 / 5
- Polubienia
- 11
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 180
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other House Equipment
- Licencja
- Creative Commons — Attribution
A clean and practical entryway organizer for keeping your vehicle keys and documents always in the same spot. Attaches to any wall or furniture with double-sided tape — no screws or drilling needed. Available in two versions: car and motorbike, each with an embossed icon and a matching colored insert for a two-tone finish.
Features
Two versions: car and motorbike
Embossed vehicle icon on the holder body
Separate insert for contrast color printing
No-drill mounting with double-sided tape
Minimal and clean design
Recommended print settings
Layer height: 0.2 mm
Material: PLA / PLA+
Perimeters: 3
Seam: rear-facing (will face the wall after mounting)
Supports: not needed
Print the insert in a contrasting color for best effect
Assembly
Print the holder body in your main color.
Print the matching insert in a contrasting color.
Apply CA glue or epoxy to the insert recess on the holder.
Press the insert in and let it cure.
Stick the holder to your wall or furniture with double-sided tape.