Night Float M_FISH: Поплавок с подсветкой для Толстолобика и хищника:
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This 3D-printed fishing float is designed for both bighead carp (silver carp) and predatory fish like pike or zander.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 1
- Wydruki
- 0
- Wyświetlenia
- 72
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor Sports
- Licencja
- Creative Commons — Attribution — Noncommercial
This 3D-printed fishing float is designed for both bighead carp (silver carp) and predatory fish like pike or zander. The body is made from glow-in-the-dark PETG filament, making it clearly visible during night fishing and early morning sessions.
Key Feature: This model is specially optimized for Vase Mode (Spiral Vase / Spiralize Outer Contour). Printing in this mode creates a continuous spiral wall with no seams, which makes the float 100% waterproof and very lightweight.
Perfect for:
Carp fishing – sensitive tip reacts to the slightest touch;
Predator fishing – works great as a live-bait float or balance rig.
Setting | Value |
|---|---|
Print Mode | Spiral Vase / Spiralize Outer Contour |
Material | PETG Glow-in-the-Dark |
Nozzle | Hardened Steel (Glow PETG is abrasive!) |
Nozzle Diameter | 0.4 mm |
Line Width | 0.8 – 1.0 mm (important for stiffness) |
Layer Height | 0.2 – 0.25 mm |
Bottom Layers | 5–8 layers (for a solid heavy base) |
Supports | OFF |
Nozzle Temp | 235–245°C |
Bed Temp | 70–80°C |
1. Top Part (Antenna):
Insert a glowing tube or a thick piece of fluorocarbon line into the top hole. If it's loose, secure it with a drop of super glue or hot glue.
2. Bottom Part (Weight Chamber):
Add lead shots or epoxy putty into the wide bottom opening.
Important: Add enough weight so that only the antenna stays above the water, while the whole body sits submerged. This makes the rig less visible to fish.
3. Fishing Line (Through Hole):
Pass your main fishing line through the central hole from BOTTOM to TOP. Use rubber stoppers or beads on both sides to fix the float at your desired depth.
4. Extra Waterproofing (Optional):
Apply 1–2 drops of super glue or UV resin to the bottom area (where the print finished) to seal any micro-gaps.
For Carp / Bighead Carp | For Predators (Pike, Zander) |
|---|---|
Use 15–30g weight for stability | Use as a sliding float with a bottom weight |
Sensitive tip detects sucking bites | Perfect for live-bait fishing |