1 / 3
Night Float M_FISH: Поплавок с подсветкой для Толстолобика и хищника: — image 1
1 / 3

Night Float M_FISH: Поплавок с подсветкой для Толстолобика и хищника:

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This 3D-printed fishing float is designed for both bighead carp (silver carp) and predatory fish like pike or zander.

Rating
0 / 5
Likes
0
Downloads
1
Makes
0
Views
72
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

This 3D-printed fishing float is designed for both bighead carp (silver carp) and predatory fish like pike or zander. The body is made from glow-in-the-dark PETG filament, making it clearly visible during night fishing and early morning sessions.

Key Feature: This model is specially optimized for Vase Mode (Spiral Vase / Spiralize Outer Contour). Printing in this mode creates a continuous spiral wall with no seams, which makes the float 100% waterproof and very lightweight.

Perfect for:

  • Carp fishing – sensitive tip reacts to the slightest touch;

  • Predator fishing – works great as a live-bait float or balance rig.

Setting

Value

Print Mode

Spiral Vase / Spiralize Outer Contour

Material

PETG Glow-in-the-Dark

Nozzle

Hardened Steel (Glow PETG is abrasive!)

Nozzle Diameter

0.4 mm

Line Width

0.8 – 1.0 mm (important for stiffness)

Layer Height

0.2 – 0.25 mm

Bottom Layers

5–8 layers (for a solid heavy base)

Supports

OFF

Nozzle Temp

235–245°C

Bed Temp

70–80°C

1. Top Part (Antenna):
Insert a glowing tube or a thick piece of fluorocarbon line into the top hole. If it's loose, secure it with a drop of super glue or hot glue.

2. Bottom Part (Weight Chamber):
Add lead shots or epoxy putty into the wide bottom opening.
Important: Add enough weight so that only the antenna stays above the water, while the whole body sits submerged. This makes the rig less visible to fish.

3. Fishing Line (Through Hole):
Pass your main fishing line through the central hole from BOTTOM to TOP. Use rubber stoppers or beads on both sides to fix the float at your desired depth.

4. Extra Waterproofing (Optional):
Apply 1–2 drops of super glue or UV resin to the bottom area (where the print finished) to seal any micro-gaps.

For Carp / Bighead Carp

For Predators (Pike, Zander)

Use 15–30g weight for stability

Use as a sliding float with a bottom weight

Sensitive tip detects sucking bites

Perfect for live-bait fishing

Tags