1 / 2
Femto and the Godhand - Berserk -  HueForge — zdjęcie 1
1 / 2

Femto and the Godhand - Berserk - HueForge

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

The Godhand have gained their fifth demon lord, Femto, and are all presented during the Eclipse.

Ocena
0 / 5
Polubienia
0
Pobrania
5
Wydruki
0
Wyświetlenia
35
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial

This is my first HueForge print, so it might not be very decent.

Filaments I used.
Filament 1 - Bambu Matte Black PLA
Filament 2 - Anycubic Gray PLA
Filament 3 - Panchroma Fossil Gray PLA
Filament 4 - Jayo White PLA

Settings:
Initial Layer - 0.16mm
Layer Height - 0.08mm
Infill - 100%
Nozzle Diameter - 0.4mm (I would recommend 0.2mm for greater detail or increasing the size of the model if your printer is able to.)

Swap Instructions:
Start with the black filament.
Swap to Gray at Layer #8 (0.88mm).
Swap to Fossil Gray at Layer #12 (1.20mm).
Swap to White at Layer #14 (1.36mm).

This took about 8 hours on a Bambu Lab A1 with AMS.

Tagi