Femto and the Godhand - Berserk - HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Godhand have gained their fifth demon lord, Femto, and are all presented during the Eclipse.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 5
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
This is my first HueForge print, so it might not be very decent.
Filaments I used.
Filament 1 - Bambu Matte Black PLA
Filament 2 - Anycubic Gray PLA
Filament 3 - Panchroma Fossil Gray PLA
Filament 4 - Jayo White PLA
Settings:
Initial Layer - 0.16mm
Layer Height - 0.08mm
Infill - 100%
Nozzle Diameter - 0.4mm (I would recommend 0.2mm for greater detail or increasing the size of the model if your printer is able to.)
Swap Instructions:
Start with the black filament.
Swap to Gray at Layer #8 (0.88mm).
Swap to Fossil Gray at Layer #12 (1.20mm).
Swap to White at Layer #14 (1.36mm).
This took about 8 hours on a Bambu Lab A1 with AMS.