174 models
Better optimize your Manga Bookshelf by using this riser to view books that you have in the back. Fits most standard sized manga books. Sized to lift manga books by 4". This is to better suit my bookshelf. Riser dimensions 6" wide X 5"…
Print approx. €12.48–€15.25 excl. taxPreliminary estimate for one variant
Better optimize your Manga Bookshelf by using this riser to view books that you have in the back. Fits most standard sized manga books. Includes front and rear bookends. Sized to lift manga books by 4". This is to better suit my…
Print approx. €17.18–€20.99 excl. taxPreliminary estimate for one variant
This is a simple manga shelf.
Print approx. €0.70–€0.85 excl. taxPreliminary estimate for one variant
- One 3D file = Two 3D prints - _____________________________________________________________ MangaBox - Standard Size Manga's dimensions : 118x16x181mm maximum 2 Prints of MangaBox - Standard Size To add : 2 plexiglass laser cutted 3 mm…
Print approx. €7.52–€9.19 excl. taxPreliminary estimate for one variant
Testing out an altered tool chain on my Mac. Not so smooth. I am no so dialed in with this setup. OBJ won't even load into the slicer after I fix them. so I would use the .stl on this one if the .3mf is wonky.
Print approx. €6.35–€7.76 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €4.55–€5.56 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PETG JAYO Gray Transmission Distance: 2.5 PETG GEETECH Gray Transmission Distance: 3 PETG JAYO White…
Print approx. €8.49–€10.37 excl. taxPreliminary estimate for PETGSource material: PET
Fichier nécessitant une surface d'impression d'au moins 15cm carré, s'imprime sans support.
Print approx. €3.91–€4.78 excl. taxPreliminary estimate for one variant
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 200x197.92mm in size You may print at higher layer heights below the Min Depth of 0.48mm The Max Depth is 1.3mm and the Actual Depth is 1.2mm…
Print approx. €3.41–€4.17 excl. taxPreliminary estimate for one variant
One of my favourite moments of the chunin exams, just ranking after the moment where Lee took off the ankle weights. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm The Model is 120.73x200mm in size You may…
Print approx. €4.58–€5.60 excl. taxPreliminary estimate for one variant
Hello! One Piece is my favorite anime/manga, so I've slowly been making my favorite characters in 3D printable images to make a collage of sorts in the future - this one is Perona, the Ghost Princess and part of the Thriller Bark Pirates.…
Print approx. €3.64–€4.45 excl. taxPreliminary estimate for one variant
The support is made for this screen: https://reprap.org/wiki/Manga_screen You need 4 M3 nuts.
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for PETGSource material: PET
Experience the peak of freedom with this Gear 5 Luffy figure! Capturing the iconic 'Sun God Nika' laughter and fluid cloud effects, this dynamic sculpt brings the most legendary moment in anime history to your desk. Designed with sharp…
This bookshelf riser will help you see the books or manga that are behind others
📚 Vertical Manga Display Stand – Showcase Your Favorite Volumes I created this minimalist vertical stand to highlight special manga volumes in my collection — the ones that deserve to be seen front and center. Whether you want to display…
Made these when I couldn't find strong enough manga/book risers for my use in my IKEA BILLY bookcase. I wanted to have an entire row across the back risen high enough room to read the titles (6cm high). I also wanted rows across the…
Manga storage elements that can be stacked, placed on a piece of furniture, or hung on the wall. Side and corner clips allows to connect them in any way you want! Fully parametric in FreeCAD.
This is my version for a Manga Riser in my Billy Ikea. Print in PLA / 25%, and need 4 of them to fill one board.
Manga Model Girl If you liked this model, a coffee is always welcome ☕🙂 buymeacoffee.com/goodbuyerclub
Riser for Manga that fits perfectly into IKEA Kallax. You need to print this 3 times to cover full width of the Kallax box. You can fit 6 vols of Kaiju No.8 on 1 riser. Theoretically height could be tweaked so you could add third row of…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…
This is a simple and practical book riser designed to create a second row of books on a shelf – because hiding books behind other books is a crime.🙂 The riser is modular and consists of: -a center part (no side walls) -a left wall -a…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…
This bookshelf or slipcase is 17 cm long and 18 cm high. On both sides, there are support walls so that the manga can stand upright. There is a top plate where manga can also be placed without pressing down on the ones below.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…
25 cm (almost 10 in) shelf, with holes for screws. Made for storing your favourite Manga books!
Better optimize your Manga Bookshelf by using this riser to view books that you have in the back. Fits most standard sized manga books. Includes front and rear right side bookends. Sized to lift manga books by 4". This is to better suit…
EDIT: Originally I've printed it with PETG but it started to bend. PLA might be a better choice. I will be revisiting this model and with some fixes. Material: PLA Brim: yes (I've used default 5mm) Infill: 0% Print time with IS: ~1.5h…
Bring captivating anime charm to life with this stunning 3D printable figurine that captures every graceful detail in perfect STL format. This elegant anime character model showcases beautiful flowing hair and dynamic pose, making it an…
Bring your favorite anime universe to life with this stunning 3D printable figurine that captures every detail in perfect STL format! This beautifully crafted anime girl model features flowing hair, elegant pose, and intricate character…
Unleash the power of the legendary Saiyan warrior with this incredible 3D printable figurine that captures every muscle and detail in stunning precision! This dynamic STL model showcases the iconic martial artist in his classic fighting…
Transform your space with this stunning 3D printable Sailor Moon figurine STL model that captures the iconic magical girl in all her glory. This graceful statue showcases the beloved anime character in her classic pose, featuring flowing…
In Brazil, this "breed" is called "fiapo de manga" ("mango fiber") because their fur looks like the stringy fibers of a mango pit.
Site a ring designed not to damage manga books ect.... is that does not need support
This is a Manga Solo shelf for the Ikea Skadis peg board. It is simply inserted to the board and the book can be placed. It can be extended as required using a connector. It was created for Pokemon mangas, but also fits One Piece,…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Creality Negro Transmission Distance: 1.2 PLA Creality Azul claro Transmission Distance: 4 PLA Creality Gris Transmission Distance: 2.6 PLA…
If you have a Bambu Labs printer with an AMS then the plate file is included with the models pre-painted. If you do not have a printer with multi-color capability, then you should change the filament about halfway through each panel in…
Bring the spirit of adventure to your space with this incredible 3D printable STL model that captures pure determination and strength! This detailed figurine showcases a powerful raised fist pose, perfect for any desk decoration or shelf…
Two rows of mangas fit one behind the other on our living room IKEA Besta shelf. I printed a raised section so that you can also see the second row. I tried to find a balance between load-bearing capacity and economical filament (pla)…
Bring your favorite anime world to life with this stunning 3D printable figurine that captures every detail of classic manga artistry! This beautifully crafted STL model showcases a stylish anime character in a confident pose, featuring…
Bring your favorite anime aesthetic to life with this stunning 3D printable figurine that captures every graceful detail in perfect STL format. This elegant anime girl statue showcases beautiful flowing hair and classic pose, making it an…
Bring captivating anime charm to life with this stunning 3D printable figurine that transforms any space into an otaku paradise! This beautifully detailed STL model showcases a graceful anime girl in an elegant dress pose, perfect as desk…
Instructions for Bambu Studio and PrusaSlicer layer swaps. Print at 100% infill with a layer height of 0.12mm with a base layer of 0.16mm This model was created with this manga panel image MIRIO . I used Elegoo Black PLA, Hatchbox Silver…
It is for czech (Tokyjsý ghúl 7, ...) and english (Hunter x Hunter 7) manga. Thicker manga would not fit. I pinted with 15% infill.
Компактна і лаконічна підставка для манги або будь-яких книг. Змінюючи масштаб, підходить до будь-якої книги.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…
For painting: Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm. Recommended to use top coat smoothing. Filaments Used: PLA Creality Negro Transmission Distance: 1 PLA Creality Azul claro Transmission…
Make the most efficient use of your bookshelves while still displaying each book in your manga series! Print as many as you need and stack them side by side.
Take a look to my Patreon ----- https://www.patreon.com/Valda3DPrinting NOTE: Due to smal details of the draw it is suggested to use a 0.2 Nozzle to achieve best result A 2 colors 3D model of Goku from Dragon Ball as lightbox “Manga…
Use white or a light color for the lithophane part, 0.1mm layer height or lower for best results (long print). The rest can be printed with 0.2-0.25mm. I made 2 models with different characters for my two kids: Model 1: Mash (Mashle),…
Model of the Amanga class from space battleship Yamato 2205 and 3199. When printing, while you can do the base size, I would recommend doing 2-3 times the base size for the most amount of details and for a decent size. Stand includes its…
A stable riser for manga that can be printed in parts. It raises the back row by 10 cm so that the titles are still easy to read. You need 5 plates, 4 side foots, and 8 middle foots. No other materials are required. I printed it out of…
This manga holder is a practical accessory for your bookshelf, allowing you to organize your favorite comics efficiently and stylishly. It keeps your manga securely in place, preventing them from falling or getting damaged. Advantages of…
Book/Manga Shelf fits 11 to 13 mangas I print with 2 walls 15% gyroid infill and no supports
J’ai conçu un support 3D spécialement adapté aux étagères Billy de chez IKEA (épaisseur : 19 mm). Ce support permet de mettre en avant une jaquette (PC, PS2, Wii, DVD) ou un manga en l’exposant directement sur la tranche de l’étagère,…
If you read mangas on the go and want to protect your reading material, this could be the solution. For me it is. You can use a rubber band to secure your manga. There are diffent varaints for: Crunchyroll (formerly Kaze) Kaiju No 8 Black…
Attack On Titan (Shingeki no Kyojin) Inspired Game/Manga/Movie Book-ends. Hold your entire Manga/Movie/Video Game collection up with these stylish and detailed Book-ends. Follow directions on model labels. Scout Logo is Pre-painted for…
Unleash the legendary power of the Saiyan Prince with this incredible 3D printable STL figurine that brings together the fierce warrior spirit of Dragon Ball Z and traditional samurai aesthetics. This stunning statue showcases Vegeta in…
Doctor Tenma : Monster : Manga Made this for my son who adores this series. For models where I use AI. Follow the directions below to get detailed figurines made from incomplete pics. AI toolchain starts with upscaling the incomplete body…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA Creality Negro Transmission Distance: 1.2 PLA Creality Gris Transmission Distance: 2.6 PLA Creality White Transmission Distance: 6 Swap…
Riser for Manga that fits perfectly into IKEA Billy. You need to print this 4 times to cover full width of the Kallax box. You can fit 11.5 vols of One Punch Man on 1 riser. Printed on Bambulab X1C with Bambulab PLA Settings: - Layer:…
*This is still a work in progress print at your own risk This an early version for testing sperate the model to objects in the slicer to print each one with a different color the base is big for any normal printer so cut it or if you have…
This is a manga or book clip that goes on a shelf and uses a tension/spring design to apply constant pressure to the shelf and allows for more variable shelf sizes to be used. This is split from the original document which is a remix of a…
modello 2d con cambio colore manuale
I do comprehensive 3D scanning and you can see some of my results here. The models are partially edited with AI due to small or missing details. If you are interested in my work and have a specific interest, you can write to me and my…
Take a look to my Patreon ----- https://www.patreon.com/Valda3DPrinting NOTE: Due to smal details of the draw it is suggested to use a 0.2 Nozzle to achieve best result A 2 colors 3D model of Vegeta from Dragon Ball as lightbox “Manga…
Manga shelf riser for the narrow billy bookcase. Takes 2 to cover the distance. I used One Piece manga as the reference so volume numbers are still visible. At least for this series, other series won't be so fortunate/
Bonjour a tous, Réalisation par mes soin de cette étagère modulable empilable, pour ranger mais manga, webtoon voir même light novel ou roman impression en PETG NOIR pour ceci, avec un remplissage gyroid a 10% suffisant pour…
Height: 140 Depth: 155 Width: 280 Print upside down without supports
Bring stunning anime artistry to life with this breathtaking 3D printable figurine that captures every delicate detail in perfect sculptural form. This elegant kneeling character model showcases intricate costume details and flowing…
IMPORTANT: NEEDS SUPPORTS. "HARO EVERYNYAN. HOW ARE YOU? FINE, THANK YOU." Chiyochichi from the animanga Azumanga Daioh. Enjoy it, can't wait to see your makes (｡• ω •｡) ♡
Adaptive 3d print
Transform your space with this stunning anime-inspired 3D printable figurine that captures incredible detail and dynamic poses! This expertly crafted STL model showcases a beautiful character design with flowing hair and expressive…
Bring the spirit of adventure to life with this stunning 3D printable STL figurine that captures every iconic detail in remarkable precision. This perfectly sculpted statue showcases the beloved straw hat-wearing protagonist in a classic…
Sakura Haruno ( Japanese : 春野 サクラ, Hepburn : Haruno Sakura ) is a fictional character in the Naruto manga and anime series created by Masashi Kishimoto . Sakura is depicted as a kunoichi affiliated with Konohagakure (木ノ葉隠れの里, English…
very simple bookend. you can use a soldering iron to fuse the 2 parts of the bookends. the car is glued. you can choose any car do you want, you just split model in half and glued to the bookend.
print at 0.2 mm the 3 diferentes models for two metods of dual color printing the complete model, and you put the pause and switch the filament, or te separated pages to print with z offset config. tutorial:
Unleash the power of the legendary Saiyan warrior with this incredibly detailed 3D printable STL model that captures Goku's iconic spirit! This stunning figurine showcases the beloved Dragon Ball protagonist in his classic martial arts…
I used superglue to attach the base, seems to work well so far!
A compact 3D-printable stand designed for manga, comics, and books up to 25 mm thick . Its angled support keeps your book securely displayed while the front stops prevent it from sliding off. Simple, lightweight, and ideal for your desk…
Isagi manga panel from Blue Lock. I printed it with a color change for the details and then I plan on coloring it with sharpies or paint in the future! Please enjoy, and check out my twitter @df3dprints
Meet Chibi Foxy Buddy ! A charming little fox inspired by Japanese manga style, designed to melt hearts and bring joy to any space. Whether it's a cute desk buddy, a gift, or part of your kawaii collection, this model is optimized for…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PLA PolyLite Black Transmission Distance: 0.3 PLA Elegoo Gray Transmission Distance: 3 PLA PolyLite White Transmission Distance: 5 Swap…
This Steampunk Book/Manga riser was designed for the IKEA Billy Bookshelf It's 10x10x36cm This riser gives you the possibility to rise the second line and gives you a little space below the books. It's modular so you can either - use the…
A Bookshelf stand for Displaying your Manga Book
I was tired of losing track of which volume I was on in any given manga series, so I made a little marker that can sit between them and let me know where I left off! The little fin slides between the covers and the labels tell me which…
Unleash the power of the legendary Saiyan warrior with this incredible 3D printable STL figurine that captures every muscular detail and iconic spiky hair! This stunning anime statue showcases the beloved Dragon Ball hero in his classic…
The perfect sidearm for a pint sized demon hunting hero ready to face the music! RIP Goldy Pond Arc T=T Model printed on a FDM printer and assembled with superglue. Print was done in silky silver PLA and painted with a variety of browns,…
Bring the fierce spirit of the Avatar to life with this stunning 3D printable figurine that captures every detail in premium STL quality. This dynamic statue showcases the beloved waterbender in an elegant flowing dress with her signature…
I made this tool for my kid who wanted to draw manga faces. Made with Onshape: link here
Last picture show print orientations, no supports needed. Printed in Rapid Petg on the K1 Max
Semplice piedistallo per reggere verticalmente un volume manga, nel corso del progetto ho effettuato tre varianti il primo rimaneva troppo ingombrante e oneroso di PLA, il secondo è andato bene ma necessitava di supporti ed infine il…
Its a wanted Poster of our boy Buggy D. God.
wall display hanger for medium sized books Adjustable mount can take books ranging from 150mm - 230mm tall with a thickness no grater than 20mm Also in two widths 60 & 100mm Print with organic supports for the joining slot
![Modular manga/book storage/shelf [FreeCAD | parametric]](https://media.printables.com/media/prints/813488/images/6288246_43e866f9-beb9-47da-9cbf-9b26a82be47b_3de6fa34-3789-466e-9521-5b25360c15a7/img_20240321_080858.jpg)
![Lithophane customizable manga lamp [FreeCAD | parametric]](https://media.printables.com/media/prints/823519/images/6355517_d7d10d3a-430e-40cf-834f-b3593d06b7eb_8fa69260-afe0-4eed-bd0e-d8aa38037521/img_20240327_205920.jpg)
