Black Clover Manga Panel Wall Art
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wall Art in the theme of Manga Panels from the series Black Clover.
- Rating
- 4 / 5
- Likes
- 30
- Downloads
- 159
- Makes
- 2
- Views
- 876
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
If you have a Bambu Labs printer with an AMS then the plate file is included with the models pre-painted.
If you do not have a printer with multi-color capability, then you should change the filament about halfway through each panel in order to achieve the desired multi color effect.
Panels 1 and 4 would have the same color changes and the same could be said about 2 and 3. If you want to change up the color scheme, feel free. At the current sizing, you can fit 2 of these on a 256 x 256 mm plate easily. Please feel free to scale up the model and make a bigger wall art piece.
To achieve the red eyes on the Demon Asta file, it may be easier to just paint the eyes or use a red marker if you do not have access to a multi color printer.
0.2mm Layer Height is fine
No supports needed
As long as your bed adhesion is good then you shouldn't need a brim. If you have an issue with the print sticking then I would add a brim for added adhesion.
This is primarily for FDM 3D Printing, not tested with resin.