Legendary Smile - Solo Leveling - Manga Panel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Smiling Statue is identified as the 'Statue of God,' serving as the primary major antagonist to face Sung Jinwoo.
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 110
- Makes
- 1
- Views
- 1,246
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
- For painting:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Recommended to use top coat smoothing.
Filaments Used:
PLA Creality Negro Transmission Distance: 1
PLA Creality Azul claro Transmission Distance: 3.8
PLA Creality Gris Transmission Distance: 2.6
PLA Creality White Transmission Distance: 7
Swap Instructions:
Start with Negro
At layer #5 (0.48mm) swap to Azul claro
At layer #6 (0.56mm) swap to Gris
At layer #10 (0.88mm) swap to White for the rest.
- For the base:
Print at 10% infill with a layer height of 0.20mm with a base layer of 0.20mm.
Activate the xy hole contour compemsation between -0.10mm and -0.25mm.
Swap Instructions:
Start with Negro
At layer #51 (10.20mm) swap to White for the rest.