Legendary Smile - Solo Leveling - Manga Panel
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
The Smiling Statue is identified as the 'Statue of God,' serving as the primary major antagonist to face Sung Jinwoo.
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 110
- Wydruki
- 1
- Wyświetlenia
- 1246
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Art & Designs
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
- For painting:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm.
Recommended to use top coat smoothing.
Filaments Used:
PLA Creality Negro Transmission Distance: 1
PLA Creality Azul claro Transmission Distance: 3.8
PLA Creality Gris Transmission Distance: 2.6
PLA Creality White Transmission Distance: 7
Swap Instructions:
Start with Negro
At layer #5 (0.48mm) swap to Azul claro
At layer #6 (0.56mm) swap to Gris
At layer #10 (0.88mm) swap to White for the rest.
- For the base:
Print at 10% infill with a layer height of 0.20mm with a base layer of 0.20mm.
Activate the xy hole contour compemsation between -0.10mm and -0.25mm.
Swap Instructions:
Start with Negro
At layer #51 (10.20mm) swap to White for the rest.