Vegeta and Trunks Hueforge Manga Panel
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vegeta hugs trunks right before he sacrifice himself in the fight against boo.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 41
- Makes
- 0
- Views
- 373
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x197.92mm in size
You may print at higher layer heights below the Min Depth of 0.48mm
The Max Depth is 1.3mm and the Actual Depth is 1.2mm
Filaments Used:
PLA PolyLite Black Transmission Distance: 0.3
PLA PolyLite Grey Transmission Distance: 1
PLA PolyLite White Transmission Distance: 5
This print uses 3 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Grey (you can also swap to white here, because the black shines through the white, it also looks like different shades)
At layer #9 (0.8mm) swap to White for the rest.