Initial D Manga HueForge
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€8.49 – €10.37 net (excluding VAT)
For file: initialD_Front_200x160_0.4n_0.07mm_PETG_MINI_13h24m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €9.43 excluding VAT (range midpoint).
- Weight reported by the author
- 38 g
- Print time reported by the author
- 13.39 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A panel from the Initial D manga recreated using HueForge
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 66
- Makes
- 0
- Views
- 1,220
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PETG JAYO Gray Transmission Distance: 2.5
PETG GEETECH Gray Transmission Distance: 3
PETG JAYO White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to Gray
At layer #18 (1.52mm) swap to Gray
At layer #21 (1.76mm) swap to White for the rest.
Gcode is for a prusa mini and is already programmed with the change points