Starlink Standard Gen3 Rev4 Flat Mount
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Flatmount starlink gen3 for RV / vans
- Ocena
- 0 / 5
- Polubienia
- 0
- Wydruki
- 0
- Wyświetlenia
- 73
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Commercial Use
Flatmount for Starlink gen 3 (Rev4), split into 8 parts to fit into 22x22mm 3D printers bed. Also full size model is included, with holes for metal plates and screws and also full size without them.
Hardware needed:
6 metal plates 95x35mm (holes distance from the sides of the plate is 7.5mm to the center of the holes)
24 M5-3.5mm screws and nuts
Design meant to be watertight and resistant to big temperature differences (+40C to -30C) so the way I designed and printed it was probably overkill for most use cases.
8 walls, with 50% infill, sanded and primed, and then painted with a white high temperature resistant paint + final coat of sealer, to ensure maximum resistance at various extreme conditions. Printed in PETG and worked great.