Starlink Standard Gen3 Rev4 Flat Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Flatmount starlink gen3 for RV / vans
- Rating
- 0 / 5
- Likes
- 0
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Commercial Use
Flatmount for Starlink gen 3 (Rev4), split into 8 parts to fit into 22x22mm 3D printers bed. Also full size model is included, with holes for metal plates and screws and also full size without them.
Hardware needed:
6 metal plates 95x35mm (holes distance from the sides of the plate is 7.5mm to the center of the holes)
24 M5-3.5mm screws and nuts
Design meant to be watertight and resistant to big temperature differences (+40C to -30C) so the way I designed and printed it was probably overkill for most use cases.
8 walls, with 50% infill, sanded and primed, and then painted with a white high temperature resistant paint + final coat of sealer, to ensure maximum resistance at various extreme conditions. Printed in PETG and worked great.