Gridfinity Bit Holder 1×2 — 21× 1/4" Hex Driver Bits | Magnetic, Baseplate Compatible
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Stop losing driver bits. This 1×2 Gridfinity bit holder keeps 21 standard 1/4" (6.35 mm) hex bits upright clean grid sys
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 15
- Wydruki
- 0
- Wyświetlenia
- 102
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Garage
- Licencja
- Creative Commons — Attribution — Noncommercial
Every bit in its place, right where your drill is.
If you've got a drawer of loose driver bits, this fixes it. The holder has a 7 × 3 grid of 21 sockets sized for standard 1/4" hex bits — slide them in and they stand upright so you can grab the one you need at a glance. It's a Gridfinity module, so it locks into your baseplate next to your other bins and tools.
### Features
- 🔩 21 sockets for 1/4" (6.35 mm) hex driver/insert bits
- 📐 True 42 mm Gridfinity 1×2 — drops into any baseplate
- 🧲 8 magnet holes (Ø6.5 × 2.4 mm) for a locked-down hold
- 🛠 Bits stay upright & visible — fast grab-and-go
- 🖨 Prints flat & support-free
### Perfect for
Drill/impact driver insert bits · screwdriver bit sets · precision/electronics bits (snug-ish; scale holes if needed) · workshop & toolbox organization
---
## PRINT SETTINGS
- Material: PLA or PETG (PETG for workshop durability)
- Layer height: 0.20 mm
- Walls / perimeters: 3
- Infill: 15–20 %
- **Supports:** None
- Orientation: As exported — sockets facing up, feet down
- Print time: ~1.5–2 h · ~35 g
Fit tip: Sockets are Ø7 mm for an easy drop-in fit on 1/4" (6.35 mm) hex bits. If your bits are tight or loose, scale the model ±2 % in your slicer.