CP1 Hex Drive Insert for Jobo Magnet Adapter
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
A printable hex drive insert for the Martax CP1 film processor to replace the sold-out original magnet adapter.
- Ocena
- 0 / 5
- Polubienia
- 0
- Pobrania
- 3
- Wydruki
- 0
- Wyświetlenia
- 38
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Photo & Video
- Licencja
- Creative Commons — Attribution — Share Alike
This is a replacement hex drive insert for the Jobo film tank magnet adapter (jobomagnetv3 on Thingiverse: https://www.thingiverse.com/thing:3809812). It fits into the central bore of that adapter and connects the Martax CP1 temperature-controlled film processor drive spindle to the Jobo tank rotation system.
The official magnet adapter for the Martax CP1 (https://www.martaxfilmlab.com/shop/p/martax-film-lab-cp1-tepmerature-controlled-film-processor) was sold out at the time this model was created, so this insert was designed as a printable alternative.
The original adapter has a round central hole. This insert replaces it with a hexagonal drive bore (12.21 mm across flats) that locks onto the CP1's hexagonal spindle. Six cylindrical magnets (6 × 2.75 mm) are glued into pockets in the outer wall, attracted to the CP1 spindle for a secure magnetic grip.
Print settings
- Material: PLA
- No supports needed
- 0.4 mm nozzle recommended (wall thickness designed around it)
- Enable thin walls in your slicer
Assembly
1. Push one magnet into each of the 6 outer pockets until it bottoms out.
2. Glue the magnets in place from the outside.
3. Glue the insert into the 24 mm bore of the Jobo magnet adapter.
Generated with OpenSCAD — the .scad source file is included so all dimensions can be tuned to your printer.