Liczymy pasujące modele…
This is completely new version! I shoot and home-develop a lot of different film formats, and none of the 110 film development reel solutions really did it for me, so I started tinkering around, and this is my latest - ALL NEW - design,…
Trichter mit größerem Innendurchmesser des Füllrohrs (Trichter V2.2.3mf) Grundplatte & Auslauf → issues fixed Added new version of lever. Will also add enclosure for Arduino for motor control and timer. Modelcraft RB350100-0A101R…
I've created replacement parts for the Jobo 1500 and 2500 film development tank system. This collection might grow if I need more spare parts, but so far I've got four kinds of center cores for the film spools as well as a replacement lid…
Developing 8 sheets of 4x5 film at a time. Print with PETCF for best performance. PLA is too crunchy PLA+/PETG/ABS are too soft ABS-CF should also work. Category: Camera
There is a newer version of this, with some great improvements. Check out my profile, or click here to go to the new version I shoot and home-develop a lot of different film formats, and I found myself unsatisfied with the “solutions” I…
I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc), I started getting approached by people wanting one of equal quality for the Minox 8x11…
I shoot and home-develop a lot of different film formats, and try as I might I couldn't find a reel/holder for APS films, so I designed one. This is the result. Oh, and if you are looking at this, I'm sure you've realized that APS film…
This is a spare part. It helps you to wind up two 120-films on one Jobo reel. On the picture you see the 3D-printed to the left and the original to the right. Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No…
this is a jobo style dev tank nozzle. This is not a ready to use model ( sure you can print the gear nozzle alone), but a model to help you design your own dev tank. All remix are welcomed. All data are measured from a tank with caliper…
simple print in place negative carriers. print in PETG, no supports required. use pliers to hold outside of hinge with carrier main body then snap the pivoting core away. the outside bit and the main body move as one with the hinge…
JobOx automation system was initially designed for use with Prusa MK3s printers. This adapter kit allows you using it on Prusa MK4 printer as well. Please note: not yet tested on MK3.5/MK3.9 upgrade kits. All parts can be printed without…
Sure, you could do this in tinkercad in 2 minutes, but we all know how lazy you are. Well, I know how lazy I am.
I been working on this lil project also - a Poorman's JOBO. Works with all the tanks I tested and or own Nikor, Patterson, Yankee, GAF. I kept this a simple as possible. I started out with and Arduino controller and a bunch of other BS I…
This MK4 Adapter Kit is needed when using latest JobOx version (v1.5) on Prusa MK4. Please note: not yet tested on MK3.5/MK3.9 upgrade kits. All parts can be printed without support. Some parts contains pre-constructed brim for better…
How to use it? See the Vimeo video: Printer settings as follows: Do some sanding or use a knife to gently remove filament that may scratch the film. I also use a steel brush to make the surface more smooth. Push the two halves together,…
English Version (print details below) Given that clips are no longer produced and have become horribly expensive for a few grams of plastic, I thought it would be useful to model them. I modeled the two clip types (normal & winged) to…
The reel must be un-clicked from both 120 and 135 settings and free floating. The clip will hold the reel spacing at 46mm to accept 1 roll of 127 film which will need to be pushed into the reel by hand. Clip on as per photo.
I don't know about everyone else, but for home film developing, I vastly prefer Jobo reels to Paterson reels, in a side-by-side comparison. I mean BIG time. So, with that in mind, and because I have recently bought a compact developing…
This part should be mounted underneath cross connection of the Magazine unit in order to make it stiffer and more reliable. To apply this update, the Magazine unit needs to be partly disassembled. All screws and connectors will be reused.…
The Jobo 1500 series tank system does not officially support processing 4x5 sheet film. This insert fits 2 sheets and requires atleast 3 35mm film spools of vertical space. So you need the 1530 tank module to fit it. It prints in two part…
Desinged for extending jobo 15xx reels for use with 70mm film Very useless, only for test. For nomal 70mm film is 15ft(4.6m), but 15xx reel can only handle 220 film (near 1.6m). T_T Print Settings Printer Brand: VoronDesign Printer:…
Read the description in the original design for the usage and need design details. To see actual prints of my design, check out the “Makes” tab (I print basically everything I design.) In this version (I've called it a “remix” but I think…
When extending the JobOx Ejectiong Unit with 20mm profiles, this foot part can be used to support the opposite end of the profiles. In current version the M6 thread must be drilled into the extender profiles. Next version will be usable…
Jobo Lift Retainning Clip Including an adapter for old style Lift For old style lift, you might also need 4x M3x22 screws and spring diameter 1.1mm
Jobo universal red cap adapter need #6 universal silicone food seal this model contains an O-ring, split it before printing!!!
I shoot and home-develop a lot of different film formats, and try as I might I couldn't find a reel/holder for Disc films, so I designed one that it working really well for me. This reel/holder is designed to hold up to three disc films…
This is a sleeve for the 15xx series of Jobo tanks/drums, for use with a Uniroller (or similar) rotation device. The reason I made this is that the Jobo drum, without this sleeve, tends to gradually roll its self off the Uniroller,…
The bucket fits in both 2800 lid types (one model requires you to push the bucket into the lid, the other requires you to turn the bucket in the lid to lock it). The bucket works as expected. If you want change something, I put my .F3D…
Jobo CPE2 Main Gear (for 6mm shaft)
Hi, Those hooks are to replace genius one, difficult to find because no longer sale. Nozzle 0.4mm Nylon PA6 Print on the side for stronger frame . Support organic
This little part will extend the Ejectiong unit towards the printer, preventing the unloaded spring sheet from flipping back and become jammed by the mowing heat bad. Original screws can be reused. This update is for Ejecting unit…
Lost the clamp for my Jobo 1136 tank. This one will also fit on the larger Jobo 2000 systems. It's needed for fastening the spiral sets on the central tube.
Zásobník na vejce s gravitačním posunem. Při odebrání vejce se posune automaticky řada vajec v před až do úplného vyprázdnění. Vejce můžete jednoduše kdykoliv doplňovat do zásobníku. Spád je pro posun mírný a nedochází k rozbití vajec.…
This system is intended for Rotary development using the Jobo 2500 tank. Note that the 1500 series will not fit, but you could build a similar system pretty easilly using the “tankhalten” and "rolle" files from the original model by…
Shelf support Printed in PETG. No support needed. Print 2 per Jobox. Screws and Nuts 1x DIN 603 M5x20 1x M5 nut 1x M5 washer 2x screws per mount to attach mount to shelf. I used self drilling sheet metal screws. Angle Iron For the shelf…
Jobo CPP3 Body for further design
UPDATED for Paterson, AP/Kaiser/Arista development tanks - 9/13/2026 The reel fit a little tight on the AP tank inner core I have, if it's too tight scale the model up .5~1% before slicing. UPDATED R2 - 9/12/2026 Revised the model to…
This is an adjusted version of side display-mount which needs to be used while mounting JobOx on MK4s in case when original mount doesn't fit.
Jobo Support Wheel need 3mm metal shaft
Replacement funnel for Jobo 1500 series system. Printed with black PETG: 0.2 layer 3 perimeters Supports: snug Top contact Z distance 0.22 Top interface layers 2
This model is suitable for Paterson 3-reel tank. Support material is required on the bottom. The two drive tabs inside the tube do not require support material. Included is also .step file you can modify so it fits to other sized tanks.…
Holder for Karmen Pill v3 onto Jobox at Prusa Mk2/2S/3/3S/3S+ Holder is designet to be mounted on left side of heatbed
Minox dev reel for jobo series 2500 and devlite 2000
UPDATED for Paterson, AP/Kaiser/Arista development tanks - 9/26/2026 This is a 120-film reel that fits the JOBO 15xx development tank. The reel loads from the center out like a steel reel. Both reel halfs are glued together, then when dry…
Holds your bottles for you while draining! The design makes the holder removable for storage using a dovetail plate that is mounted to the body with Heavy Duty Nano style tape or and double sided adhesive you feel comfortable with. I have…
I don't know about everyone else, but for home film developing, I vastly prefer Jobo reels to Paterson reels, in a side-by-side comparison. I mean BIG time. So, with that in mind, and because I have recently bought a compact developing…
This is a replacement hex drive insert for the Jobo film tank magnet adapter (jobomagnetv3 on Thingiverse: https://www.thingiverse.com/thing:3809812 ). It fits into the central bore of that adapter and connects the Martax CP1…
Jobo Paper Grip for use with the Jobo Duolab for printing photos using trays. To be completed with smartphone suction cups (the ones with adhesive backing).
This model is suitable for Paterson 3-reel tank. Support material is required on the bottom. The two drive tabs inside the tube do not require support material. Included is also .step file you can modify so it fits to other sized tanks.…
Holds your bottles for you while draining! The design makes the holder removable for storage using a dovetail plate that is mounted to the body with Heavy Duty Nano style tape or and double sided adhesive you feel comfortable with. I have…
simple print in place negative carriers. print in PETG, no supports required. use pliers to hold outside of hinge with carrier main body then snap the pivoting core away. the outside bit and the main body move as one with the hinge…
