1 / 14
Core and cog lid for Jobo Tank System 1500/2500 — zdjęcie 1
1 / 14

Core and cog lid for Jobo Tank System 1500/2500

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

I've created replacement parts for the Jobo 1500 and 2500 film development tank system. This collection might grow if…

Ocena
5 / 5
Polubienia
31
Pobrania
317
Wydruki
2
Wyświetlenia
1824
Oceny
3

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

I've created replacement parts for the Jobo 1500 and 2500 film development tank system.

This collection might grow if I need more spare parts, but so far I've got four kinds of center cores for the film spools as well as a replacement lid for the cog system.

Center cores (all printable without support if you rotate them 180 degrees):

You can print these in flexible filament (e.g. TPU) to use with stainless steel reels (see pictures). I use them with 127 film spools and it works like a charm.

  • 40mm: 1-reel base core
  • 82mm: 2-reel base core
  • extension core
  • 174mm: same length as 82 + extension core ### Cog lid:

  • regular version

  • modified to be printable without support
  • top washer seal (this is really thin and hence hard to print)
  • buy O-rings with 58mm outer diameter and 1.9mm thickness as the lower seal ### Future work:

    Let me know if you have any ideas for replacement parts for the 1500/2500 systems or for the CPE-2 Plus film developer. I'm working on lids for the 600ml bottles but couldn't get them to be air tight so far, which defeats the purpose.

    Print Settings

Printer:

Wanhao Duplicator i3

Rafts:

No

Supports:

No

Resolution:

any

Infill:

doesn't matter


Notes:

Use black filament only (avoid light leaks). Flip center cores to print the top first. This way you won't need supports.

How I Designed This

Onshape

Category: Camera

Tagi