1 / 8
R2 35mm film reel for JOBO 1500, Paterson, and AP - Kaiser - Arista development tanks — zdjęcie 1
1 / 8

R2 35mm film reel for JOBO 1500, Paterson, and AP - Kaiser - Arista development tanks

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

35mm spiral reel for the 1500 series JOBO, Paterson, and AP dev tanks. The film is held by the sprocket holes.

Ocena
0 / 5
Polubienia
15
Pobrania
28
Wydruki
0
Wyświetlenia
177
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Photo & Video
Licencja
Creative Commons — Attribution

UPDATED for Paterson, AP/Kaiser/Arista development tanks - 9/13/2026

The reel fit a little tight on the AP tank inner core I have, if it's too tight scale the model up .5~1% before slicing.

UPDATED R2 - 9/12/2026

Revised the model to simplify the print to only two components. The film fitment was slightly adjusted, and the film sprocket catch were also adjusted for easier starting. The parts are still printed without support, at 100% infill in PETG.

35mm spiral reel for the 1500 series JOBO developing tank. The film is held by the sprocket holes and is loaded in the same way as a steel reel. The internal detents hold the spool tight on the internal tank shaft.

I printed in Polymaker PETG, 100% infill, no supports, and used super glue to put the parts together. The sprocket hooks work but could use some tweaking to improve the functionality.

Tagi