1 / 8
R2 35mm film reel for JOBO 1500, Paterson, and AP - Kaiser - Arista development tanks — image 1
1 / 8

R2 35mm film reel for JOBO 1500, Paterson, and AP - Kaiser - Arista development tanks

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

35mm spiral reel for the 1500 series JOBO, Paterson, and AP dev tanks. The film is held by the sprocket holes.

Rating
0 / 5
Likes
16
Downloads
28
Makes
0
Views
189
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

UPDATED for Paterson, AP/Kaiser/Arista development tanks - 9/13/2026

The reel fit a little tight on the AP tank inner core I have, if it's too tight scale the model up .5~1% before slicing.

UPDATED R2 - 9/12/2026

Revised the model to simplify the print to only two components. The film fitment was slightly adjusted, and the film sprocket catch were also adjusted for easier starting. The parts are still printed without support, at 100% infill in PETG.

35mm spiral reel for the 1500 series JOBO developing tank. The film is held by the sprocket holes and is loaded in the same way as a steel reel. The internal detents hold the spool tight on the internal tank shaft.

I printed in Polymaker PETG, 100% infill, no supports, and used super glue to put the parts together. The sprocket hooks work but could use some tweaking to improve the functionality.

Tags