41 models
This is completely new version! I shoot and home-develop a lot of different film formats, and none of the 110 film development reel solutions really did it for me, so I started tinkering around, and this is my latest - ALL NEW - design,…
This is an easy-loading reel for developing up to 6 sheets of 4x5 film with a standard Paterson system. Sheets are slid in via the entry slots and are kept in place with keeper tabs on the top and bottom. This design was inspired by the…
'Stylised' (ie. not 100% accurate) reproduction of the Colt Paterson 1836 modelled in TinkerCAD using parts from https://grabcad.com/library/91991. Plugfire components are the original Paterson parts, Cartridge components are what parts…
Update 5-Jul-2021: Added a mid section to the 45 version as sometimes under heavy agitation the film edges will poke out the sides. ---------- Not blocking commercial on this one, and included the Fusion and Step files for you to improve…
I shoot and home-develop a lot of different film formats, and after releasing a few different reels for lesser used formats (110, APS, disc), I started getting approached by people wanting one of equal quality for the Minox 8x11…
I shoot and home-develop a lot of different film formats, and less-standard film development reels (like APS) are hard to come by, and expensive AF when they do creep onto the market. So.... I made my own. This one is designed to work in…
There is a newer version of this, with some great improvements. Check out my profile, or click here to go to the new version UPDATE: I added tweaks 8, 9, & 10 described below, today (Nov 15, 2020) I shoot and home-develop a lot of…
colt paterson revolver made by samuel colt 1836
I needed some reels for APS (24mm) film. I was inspired by the excellent work of @thinbegin but his models didn't fit my particular developing spindle. So, like any well-adjusted person, I spent too much time making my own parametric…
This is designed to motorize agitation on a Paterson film development tank. I based it on my Universal Film Developing Tank. It has teeth to mesh with the teeth on the funnel to mount a 28BYJ48 stepper motor above a 3D printed shaft. The…
I purchased a second-hand Paterson Super System 4 Daylight Developing Tank that came with no lid. I didn't have an original to copy from so I chanced it with this and it works pretty much perfectly. Printed in TPU Print instructions…
How to use : Take your tank tube and put it through the bottom (the flat side) of the adapter. Put the assembly in the tank Close with the funnel. When you shake their should be very little play How to load : In your darkroom/bag remove…
This is an easy-loading reel for developing up to 6 sheets of 3x4 film with a standard Paterson system. Sheets are slid in via the entry slots and are kept in place with keeper tabs on the top and bottom. This design was inspired by the…
A replacement seal for the Paterson System 4 Tank. It's a good push fit and best printed in flexible material. Print instructions Printed in TPU. Variable layer height - 0mm to 3mm – 0.3mm 3mm to 12mm – 0.15mm 100% infill Had better…
Spiral for developing sheet film 13x18 cm (5x7 inches). Suitable for Paterson Multi-reel 3 tank. Holds 4 sheets of film. Developer consumption: Standing development – 980ml Rotation development – 500ml Consists of 3 parts that need to be…
A replacement lid for the Paterson System 4 daylight film developing tank. Printed in TPU. Quite a tight fit, still a tiny bit leaky but I've found these tanks always were. Print instructions Printed in TPU 0.3mm layer height, 100% Infill…
I don't know about everyone else, but for home film developing, I vastly prefer Jobo reels to Paterson reels, in a side-by-side comparison. I mean BIG time. So, with that in mind, and because I have recently bought a compact developing…
Fast loading jig for the Paterson Tank Reels. Support open source film development tools: https://ko-fi.com/nordiclab 📷 Behind the scenes & photography: https://www.instagram.com/sasha_nordiclab 🛠 Discord: https://discord.gg/JCAADnXDAA 💁…
I shoot and home-develop a lot of different film formats, and try as I might I couldn't find a reel/holder for Disc films, so I designed one that it working really well for me. This reel/holder is designed to hold up to three disc films…
A reel to hold two 4x5" film sheets to develop into a PTP 115 Paterson Tank. This tank is made to develop simultaneously two 135 film bands. It is originally equiped with two 135 reels. No need to use supports. Best print with transparent…
Open reel compatible with Paterson Tanks system and size Support open source film development tools: https://ko-fi.com/nordiclab 📷 Behind the scenes & photography: https://www.instagram.com/sasha_nordiclab 🛠 Discord:…
This is a reproduction and modification of the original agitator for the Paterson System 4 tanks, primarily intended for the first generation System 4 tanks. The 110mm agitator stick is ~20mm longer than the original, making it stick out…
This is a work in progress. I haven't tested it yet, but it should fit 3.5-inch-wide rolls. I'll show some examples once I find time to cut some film and make backing paper. Both 101 and 122 film is 3.5 inches wide. The parts should fit…
Zentralrohr als Ersatzteil für den Paterson Entwicklungstank mit zwei oder drei Spulen. An der Unterseite ist Stützmaterial erforderlich. Die zwei Mitnehmerlappen im inneren des Rohres erfordern kein Stützmaterial. Achtung! Darauf achten,…
This system assists with easy and consistent film development by enabling automatic agitation in a Paterson System 4 developing tank. It is sized for a NEMA-17 type stepper motor. I drive my motor with an Arduino microcontroller and…
Paterson System 4 Development Tank, allows you to wash negatives without taking out from the spiral sprocket. You need to attach a special hose to the center of the top cap and connect the hose to the water tap. This hose is easily made…
Distanzen für die Filmspulen in Paterson Filmentwicklungstanks. Wenn man nicht alle Spulen braucht, damit die Spulen im Tank nicht verrutschen. Für 2 Spulen Tanks und 3 Spulen Tanks in insgesamt sieben verschiedenen Längen, je nachdem wie…
UPDATED for Paterson, AP/Kaiser/Arista development tanks - 9/13/2026 The reel fit a little tight on the AP tank inner core I have, if it's too tight scale the model up .5~1% before slicing. UPDATED R2 - 9/12/2026 Revised the model to…
Power-Wash adapter for Paterson System 4 tanks using standard (G1/2) shower hose threads to allow you to use it with a standard shower faucet (or any number of adapters). The thick version is designed to fit for original Paterson columns,…
This model is suitable for Paterson 3-reel tank. Support material is required on the bottom. The two drive tabs inside the tube do not require support material. Included is also .step file you can modify so it fits to other sized tanks.…
Hi This is an alternative agitator rod for the Paterson Super System 4 rotary development tanks. I have two issues with the original agitator rods: They are so short you easily get photochemistry on your fingers if you're not careful when…
Replacement reel for the Paterson System 4 series 5 reel tanks, specifically designed for smaller printers with height limitations. Print the bottom piece with the foot facing down, and supports enabled for best results. Print the top…
Stapeldorn für Paterson Entwicklungsspiralen damit diese nicht im Schrank herumfliegen. In vier verschiedenen Höhen für zwei, drei, vier oder fünf Spiralen. In zwei verschiedenen Designs, eine oben geschlossen und mit Infill zu drucken,…
UPDATED for Paterson, AP/Kaiser/Arista development tanks - 9/26/2026 This is a 120-film reel that fits the JOBO 15xx development tank. The reel loads from the center out like a steel reel. Both reel halfs are glued together, then when dry…
Pierścień pozwala na zamontowanie szpuli paterson w zbiorniku Krokus 2000, wystający trzpień blokuje pozycję szpuli co pozwala na obracanie całym zestawem.
I don't know about everyone else, but for home film developing, I vastly prefer Jobo reels to Paterson reels, in a side-by-side comparison. I mean BIG time. So, with that in mind, and because I have recently bought a compact developing…
Modularer Stapeldorn für Paterson Entwicklungsspiralen damit diese nicht im Schrank herumfliegen. Der Stapeldorn kann mit verschieden langen Segmenten beliebig lange oder kurz zusammengestellt werden. Bestehend aus einem Bodenteil, einer…
Zentralrohr OHNE Mitnehmer für den Paterson Entwicklungstank mit zwei oder drei Spulen. Durch die fehlenden Mitnehmer kann ein Schlauch oder Trichter besser / tiefer eingesteckt werden. An der Unterseite ist Stützmaterial erforderlich.…
This model is suitable for Paterson 3-reel tank. Support material is required on the bottom. The two drive tabs inside the tube do not require support material. Included is also .step file you can modify so it fits to other sized tanks.…
3D printable topographic miniature of Paterson - 🇺🇸 United States Capture the beauty of Paterson 's city landscape with this topographic miniature! This 3D model represents the geographic area around the geo coordinates 40.917, -74.172…
Hi This is an alternative agitator rod for the Paterson Super System 4 rotary development tanks. I have two issues with the original agitator rods: They are so short you easily get photochemistry on your fingers if you're not careful when…
![NordicLab Reel Fast Loader [Paterson system]](https://media.printables.com/media/prints/bd177351-4ef1-48b9-b0c2-e997e9d5d2e7/images/13092927_35105bfb-c189-4e88-917e-97166acec3b8_1859d886-9cad-49eb-bbbc-8d5566d99488/untitled-23.png)
![NordicLab OpenReel 35/120 [Paterson system]](https://media.printables.com/media/prints/2195ae1f-4305-4f5d-8786-67fa4b8d09db/images/13092715_9cd52386-1c5a-436f-84ed-58ee41c0fe9d_9bad73f0-d1e5-4eef-a6eb-4d09841c3745/openreel.png)
