1 / 2
Rotation Leveling Sleeve for Jobo 15xx Tank — zdjęcie 1
1 / 2

Rotation Leveling Sleeve for Jobo 15xx Tank

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

This is a sleeve for the 15xx series of Jobo tanks/drums, for use with a Uniroller (or similar) rotation device

Ocena
0 / 5
Polubienia
7
Pobrania
45
Wydruki
1
Wyświetlenia
406
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Other Ideas
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

This is a sleeve for the 15xx series of Jobo tanks/drums, for use with a Uniroller (or similar) rotation device. The reason I made this is that the Jobo drum, without this sleeve, tends to gradually roll its self off the Uniroller, because the shape of the Jobo lid makes one side have a larger diameter/radius. This sleeve corrects that, for a more even rotation on the Uniroller machine

To see actual prints of my design, check out the “Makes” tab (I print basically everything I design.)

Print Settings

Printer: X-one2

Rafts: No

Supports: No

Resolution: 0.4

Infill: 8%

Filament: GTS3D / eSun / Any

Filament Color: Black / Any
 

Notes: 

This model doesn't need to necessarily look pristine, so I chose the fastest print settings I could think of. You could make tweaks to the settings (0.2 resolution, for example) if you wanted to make it look smoother/cleaner.

 

Category: Other

Tagi